Technical Data; Troubleshooting; Maintenance And Cleaning - Black and Decker FSMH1321 Manual De Instrucciones

ENGLISH
Accessories
The performance of your appliance depends on the accessory
used. BLACK+DECKER accessories are engineered to high
quality standards and designed to enhance the performance
of your appliance. By using these accessories you will get the
very best from your equipment.

Technical Data

Voltage
V
ac
Power
W
Tank
ml
Capacity
Weight
kg
Voltage V
ac
Power W
Tank
ml
Capacity
Weight kg
Voltage
V
ac
Power W
Tank
ml
Capacity
Weight kg
Voltage
V
ac
Power W
Tank
ml
Capacity
Weight kg
Voltage V
ac
Power
W
Tank
ml
Capacity
Weight
kg
Voltage V
ac
Power W
Tank
ml
Capacity
Weight kg
Voltage V
ac
Power W
Tank
ml
Capacity
Weight kg
14
(Original instructions)
FSMH1321
230
1300
500
2.7
FSMH1351SM
230
1300
500
2.7
FSMH13101SM
230
1300
500
2.8
FSMH13151SM
230
1300
500
2.8
FSMH1321J
230
1300
500
2.7
FSMH1321JSM
230
1300
500
2.8
FSMH1321JMD
230
1300
500
2.8

Troubleshooting

If your appliance seems not to operate properly, follow the
instructions below. If this does not solve the problem, please
contact your local BLACK+DECKER repair agent.
Problem Step
The steam mop is not 1.
turning on
2.
3.
The steam mop is not 4.
producing steam
5.
6.
The steam mop stops 7.
producing steam
during use
The steam mop is 8.
producing too much
steam during use
The steam mop is 9.
producing too little
steam during use
No steam is being 10.
produced from the
hand held steam
11.
cleaner
The hand held steam
12.
cleaner is producing
too little steam during
use
13.
The hand held steam 14.
cleaner is producing
too much steam during
use
The accessories keep
15.
falling off the unit
Steam is escaping
16.
from unexpected areas
of the unit
Where can I get further
17.
information/
accessories

Maintenance and cleaning

Your BLACK+DECKER corded appliance has been designed
to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends
upon proper appliance care and regular cleaning.
Warning! Before performing any maintenance or cleaning on
corded appliances switch off and unplug the appliance.
Wipe your appliance over using a soft damp cloth.
u
For stubborn marks you can use a mild solution of soap
u
and water to dampen your cloth.
Possible solution
Check the unit is plugged in at the wall
socket.
Check the unit is switched on using the
ON/OFF switch (1)
Check the fuse in the plug.
The steam mop will only produce steam if
the hand held steam cleaner (5) is
correctly docked into the main body (11)
or the steam hose is fitted or the
Autoselect is turned to ON
TM
Check that the water tank is full. Note:
When first filled or after running dry it can
take up to 45 seconds for steam to be
produced.
Check steps 1, then 2, then 3
Check steps 4, then 5, then 3
Turn the Autoselect dial (2)
TM
anti-clockwise to reduce the amount of
steam being produced
Turn the Autoselect dial (2) clockwise to
TM
increase the amount of steam being
produced
Check that the Autoselect dial (2) is at
TM
the ON position
Check steps 5, then 1, then 2, then 3
Turn the Autoselect dial (2) clockwise to
TM
increase the amount of steam being
produced
Check step 5
Turn the Autoselect dial (2)
TM
anti-clockwise to reduce the amount of
steam being produced
Refer to the assembly chapter for correct
fitting instructions of all parts and
accessories
Refer to the assembly chapter for correct
fitting instructions of all parts and
accessories
www.blackanddecker.co.uk/steammop
www.blackanddecker.ie/steammop