Std 9 B Power Supply Unit - SAMES KREMLIN STD 9 Manual De Instrucciones

8. STD 9 B POWER SUPPLY UNIT


INSTALLATION
A typical installation designed to spray non-flammable conductive material (water-based paints)
must not be used to handle flammable material (solvent-based paints).
The coating material equipment (pump or pressure pot) must be installed inside the bubble
especially designed to receive such an equipment.

OPERATING PRINCIPLE
The K3 electrostatic gun is electrically supplied through the STD 9 B power unit (special water-
based). The air flow-switch located in the STD 9 B power supply unit includes an air sensor - When
the gun trigger is released, the electrical charge accumulated by the pump or the pressure pot is
automatically evacuated through the ground.

TYPICAL INSTALLATION
Refer to ISO BUBBLE instruction manual and gun instruction manual.
KREMLIN REXSON Page 12 Manual : 573.162.112