SAMES KREMLIN STD 9 Manual De Instrucciones página 11

13 - The parts to be painted must be properly grounded. Any incorrect electrical continuity might result in
shock hazard.
14 - Never operate the electrostatic spray gun if air leaks are detected on the gun. Never use air hoses
on which air leaks can occur.
15 - Be sure that tip and air cap are in position and hand tightened with the retaining ring onto the gun
before turning on the power supply.
16 - Verify that any person entering the spray area is correctly grounded with conductive sole shoes (in
accordance with EN 50 053 standard).
The operator must not wear gloves which insulate the hand from the conductive gun handle. If using
gloves, check that they are conductive (in accordance with EN 50 053) or that a square has been
cut-out in the glove palm.

SERVICING
17 - After any servicing or cleaning, never switch on the power supply before tip and air cap are in
position and secured with the retaining ring onto the gun.
18 - Never immerse the gun or plastic parts of the gun in solvent.
This could seriously damage the gun and cause fire, explosion or body injury. To clean the gun use
soft cloth or bristle brush with a moderate amount of non-conductive solvent, wipe the front of the
gun at fluid nozzle with the gun pointed down to prevent dirty solvent from flowing back into the air
passages.
19 - Before disconnecting the hoses, check that they are no more under pressure and that the power
supply is off.
20 - The personnel involved in the electrostatic coating system servicing must be trained and qualified. If
you face any trouble which cannot be repaired, do not try to start up the equipment. Consult
immedately your local authorized KREMLIN distributor for assistance.

ENVIRONMENT
KREMLIN REXSON
This equipment consists of a label plate with the name of the manufacturer, the
equipment part number, the interesting informations to use correctly the
equipment (pressure, voltage...) and the above pictogram.
The equipment is designed with and consists of high quality materials and
components which can be re-used.
The 2012/19/UE European Directive covers all equipments with a crossed-out bin
pictogram. Please inform yourself about the collection systems for electric and
electronic equipments.
Please act according to local rules and do not throw the old equipments with
household wastes. A correct disposal of the old equipment will help prevent
negative consequences for the environment and health.
Page 3 Manual : 573.162.112