SANUS VuePoint F11c Manual De Instrucciones página 11

4. Install wall plate using two lag bolts
16
CAUTION:
Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts
NOTE: If needed, you can make small level adjustments to the wall plate by loosening the bottom lag bolt and shifting the wall plate until level.
Tighten the bottom lag bolt
17
Go to STEP 3 on PAGE 14.
4
17
. Tighten the lag bolts only until they are pulled firmly against the wall plate.
17
when adjustments are complete.
16
17 .
16
17
11