If the signal is detected the clock display
Central European Time, date and day of the week. A static radio
tower symbol
Basic Settings.
If the attempts to receive a signal fail the main station will stop attempting
to receive a signal after 7 minutes and the radio tower symbol
disappear. For information on how to resolve this issue please refer to
section Troubleshooting.
After successfully receiving the WWVB signal, press the UP button
to select the time zone display between P = Pacific UTC-8; M =
Mountain UTC-7, C = Central UTC-6, E = Eastern UTC-5 in the Clock
field
24
You may reactivate reception by pressing and holding the
DOWN /
symbol
The time can also be set manually. For more details please refer
to section Basic Settings.
Wall-mounting the temperature station and / or the
outdoor sensor:
Note: This step requires an electric drill and a crosshead screwdriver.
DANGER TO LIFE, RISK OF INJURY AND PROPERTY
DAMAGE! Carefully read the instructions for use and safety
notes for your drill.
DANGER TO LIFE! Be careful that you do not hit electrical, gas
or water lines when drilling into the wall. If necessary, check the
wall with a wall scanner before drilling.
18 US-EN
296586_1901_aur_Funk-Wetterstation_Content_US.indd 18
appears. For more details please refer to section
.
button
9
in the clock display
will show the current
24
for three seconds until a radio tower
becomes animated.
24
will
8
24.06.19 11:47