Initial Use; Setting Up The Products; Starting The Outdoor Sensor / Changing Batteries; Starting The Main Station / Changing Batteries - lidl HG05124A-US-RX Manual De Instrucciones

Initial Use

Note: First insert the batteries in the outdoor sensor, then the main
station.

Setting up the products

ATTENTION: First start the outdoor sensor, then the main station.
If possible, do not expose the outdoor sensor or main station to
direct sunlight. Place it on a horizontal, level surface or mount to
a plumb wall.
The main station can be hung by the main station eyebolt
flip out the stand
Starting the outdoor sensor /
Changing batteries
Open the battery compartment
sensor by sliding the battery compartment cover
of the arrow.
First remove the old batteries when changing batteries.
Insert the new batteries, type LR06, in the battery compartment
Please note the battery polarity. This is indicated in the battery
compartment.
Close the battery compartment cover. The signal LED
front of the outdoor sensor will briefly light up. The signal LED will
then flash about twice a minute, indicating wireless transmission.
Starting the main station /
Changing batteries
Open the battery compartment cover
station by pulling up on the tab at the bottom of the battery com-
partment.
First remove the old batteries when changing batteries.
16 US-EN
296586_1901_aur_Funk-Wetterstation_Content_US.indd 16
to place it on a horizontal, level surface.
6
on the back of the outdoor
21
in the direction
18
on the
17
at the back of the main
5
or
4
.
21
24.06.19 11:47