For Your Safety - Hazet-Werk 9020-2 Instrucciones De Uso

GB USA
Dear Customer,
You have made a good choice.
This HAZET tool in front of you is
a high-quality product that will
make your work easier.
General information
• Please take care that the user of this tool
carefully reads through these operating
instructions and understands all information
given in there before the first use.
• These operating instructions contain impor-
tant advices that are necessary for a safe
and trouble-free operation of your HAZET air
ratchet.
• For this reason, always keep these operating
instructions together with your HAZET air
ratchet.
• This tool has been designed exclusively for
particular applications. HAZET emphasizes
that any modification of this tool and/or an
application that does not correspond to its
intended application are strictly forbidden.
• HAZET will not be liable for any injuries to
persons or damages to property that are due
to an improper application or misuse of this
tool respectively due to the disregard of the
safety instructions.
Attention: Please pay attention to these
symbols!
Read the Operating Instructions!
The operator is obliged to observe
the operating instructions and has to
instruct all users of the pneumatic
tool according to the information
given in this manual.
Attention!
This symbol marks important specifi-
cations,
safety risks respectively safety advi-
ces.
Do not leave plugged-in pneumatic tools unattended.
Always wear personal protective clothing and safety equipment.
10

For Your Safety

and
safety tips:
dangerous conditions,
• Wear work gloves and eye
protection. Pneumatic tools
can raise chips, dust and
other abraded particles at
high speed, what may result
in severe eye injuries. Com-
pressed air is dangerous. The
air flow may cause harm to
sensitive parts of the body
like eyes, ears etc. Dust and
objects being raised by the
air flow may cause injuries.
• Use ear protection. Long
exhibition to the working
noise of a pneumatic tool
may result in a permanent
hearing loss.
• Wear face or dust mask.
Breathing in the steam of
some materials like adhesi-
ves and tar that contain dan-
gerous chemicals can cause
serious harms.
• Wear proper-fitting protec-
tive clothing. Tools with
rotating parts or tools that
power other tools,
sockets etc., can get caught
in the hair, clothing, jewellery
or other loose objects what may result in
severe injuries. Never wear too large clothing
and/or clothing with bands or loops which
may get caught in the rotating parts of the
tool. During the work take off jewellery, wat-
ches, identification tags, bracelets, neckla-
ces etc. that could get caught in the tool.
Never touch the moving parts of a tool. Long
hair should be covered or tied together.
• Keep children away from pneumatic
tools. Unattended tools or tools that are
connected to the compressed air supply
may be used by non-authorized persons and
could injure them or other persons.
• Use perfect sockets only. Low-quality,
unsuitable or defective tools like sockets etc.
may loosen during operation and can be
flung throughout the work area what may
result in very severe injuries. Only use
sockets that are approved for the speed of
the tool. Do not use sockets that have fallen
down, been shocked or damaged during
operation.
e.g.