C Re Nd Cle Ning; Troubleshooting - Clear2O CWS100A Manual Del Usuario

b . Using your index finger, lift the filter lid to open
(U) .
U
c . Insert the filter into the filter reservoir by lining
up (up arrow) on the filter bar with
▲
symbol) on the lid (V) .
V
d . Turn the bar clockwise to the (locked symbol)
position . Be sure filter is locked in place (W) .
Tip: The bar must be fully aligned with the
(locked position) for the filter lid to close .
e . Close the filter lid .
W
CLE NING
Pitcher
1 . Remove lid assembly:
a . To remove the lid assembly, pull the quick-connect hose out of the storage
compartment .
b . Holding the pitcher by the handle with one hand,
grasp quick-connect hose with your other hand
– as close as possible to where it connects to the
pitcher (X) .
c . Gently pull up on the hose to release the lid
assembly .
X
11

TROUBLESHOOTING

Filter lid does not close
Not able to attach
connector to the faucet
Water leaks or sprays
(unlock
from connection at faucet
Cannot remove the filter
For additional instruction or assistance, please visit our website – www.clear2o.
com – and click on "Customer Care" at the top of the page.
The website includes a tutorial video that can be viewed by clicking
"Tutorial Video".
If you still require assistance, please call customer service at 1-800-231-9786.
Make sure the filter is securely locked
in place . Verify the bar on the filter is fully
aligned with the (locked symbol .
Follow instructions for ttaching
Connector to Faucet .
Verify that you placed the washer
between the faucet and the adapter .
Confirm that you have pushed the faucet
connector all the way onto the faucet .
Turn filter bar past the unlock position
and keep turning until filter is released .
12