Unitor HPC 30/1 Manual Del Usuario página 13

Quick reference guide
This high pressure washer has been designed for
professional use typically in following cleaning ap-
plications:
floor/wall, auto/truck, buildings/constructions, con-
tainer/barrel and craftsman use.
The pictorial quick reference guide
The pictorial quick reference guide is designed for
helping you when starting up, operating and storing
the unit. The guide are subdivided into 5 sections.
A
Before starting
DO READ SAFETY INSTRUCTIONS BEFORE USE!
Operating elements:
1. Inlet with water filter
2. Nipple for high pressure hose
3. Lifting handle
4. Cabinet
5. Cable release
6. Oil sight
7. On/off switch
8. Lance
9. Holder for lance
10. Ergo 2000 spray handle
11. Child lock
12. Holder for spray lance
13. Holder with a 2½ l canister
14. Cabinet lock
15. Foam Sprayer
16. Flexo Power lance
17. Placement for lances
18. Cable end fixation
19. Foot kick
20. Holder for Foam Sprayer/Canister lid
21. Hose hook
22. Pressure gauge
Assembling the unit:
1.0 Mount handle on hose reel
1.1 Mount filter and Gardena coupling
1.2 Mount the seal and 3/8" nipple on high
pressure outlet
1.3 Connect hoses (water and high pressure
hose)
1.4 Mount the lance
1.5 Connect the electrical cable to mains.
B
Switching on the unit
1.0 Check oil level (see E1.2)
1.1 Open water tap
1.2 Switch on the High Pressure Washer
1.3 Open child lock at spray handle
1.4 Activate sprayhandle
Original instruction
All manuals and user guides at all-guides.com
Control/operation
Using cleaning agents:
1.0
1.1
1.2
1.3
Adjust pressure at FlexoPower lance (Standard
models):
3.0
Cable unwind and storage:
4.0
4.1
4.2
Water filter cleaning:
5.0
After using the unit
1.0
1.1
1.2
1.3
1.4
1.5
1.6
Maintenance
1.0
1.1
1.2
1.3
C
Check / clean hole in suction limiter at Foam
Sprayer
Mount Foam Sprayer at canister
Set spray angle horizontal/vertical
Activate spray handle.
Turn the blue part of the nozzle head Min./
max.
Turn the cable hook for cable release /
storage
Fixate cable end at Hose hook after use
During use cable and hose MUST be
completely unwind
When filter is clogged up, unscrew the glass,
rinse the filter and assemble again
D
Switch off the High Pressure Washer
Disconnect from mains
Turn off the water
Release pressure at spray handle
Set child lock
Rewind hose & lock hose reel
Place spray handle and lance in holders
E
Unlock cabinet opening cabin locks (use
coin or screwdriver)
Remove cabinet
Check / tip up oil to max (SAE 80W-90)
Oil max as NA3 (HPC 30/1)
13