Connecting Audio Devices - Toshiba dynadock V Manual Del Usuario

24
Setting Up the dynadock™ and Connecting Peripherals
Connecting your peripherals

Connecting audio devices

The dynadock™ provides two audio ports, as shown in the
following illustration.
(Sample Illustration) dynadock™ audio ports
The following table indicates which port to use for each type of
audio activity.
Activity
Audio playback
Audio recording
When your computer is docked, the audio ports on the computer are
automatically disabled and the audio ports on the dynadock™ are
automatically enabled. In most cases, simply connect your audio
device to the appropriate port on the dynadock™ and the port is
ready to use. To use the computer's audio ports (instead of the
dynadock's audio ports) when the computer is docked, please see
"Configuring audio ports" on page
NOTE
Headphone jack
Microphone jack
Audio Device
Headphones/headsets/
speakers
Microphone
If you switch between the computer's audio ports and the dynadock's
audio ports, you may have to restart your media player if it is
running.
Use this port:
Headphone jack
Microphone jack
35.