HURAKAN HKN-ME709 Manual Del Usuario página 43

If you do not plan to use the machine for a long period, turn it off and pull out the plug. Store
the machine in a dry place and keep away from children. Keep the machine clean. Check the
machine regularly; clean it according to the instruction manual.
3. MALFUNCTION
Switch power off, then pull plug out immediately when the machine has been damaged in any
manner.
When malfunction occurred, try to find solutions for the manner by referring to the table
below.
Do not try to fix the machine by yourself in order to avoid getting injury, return machine to
the nearest authorized service facility for examination, repair or adjustment if needed.
Otherwise the manufacturer will not assume the responsibility for any injury.
Problem
Grinder sounds
unusual
Coffee can not be
flowed out
Brewing unit can
not be moved
No water or steam
IMPORTANCE!
Meaning of crossed out wheeled dustbin:
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection
facilities.
Contact your local government for information regarding the collection systems available.
If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak
into the groundwater and get into the food chain, damaging your health and well-being.
When replacing old appliances with new ones, the retailer is legally obligated to take back
your old appliance for disposals at least free of charge.
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
Children should be supervised to ensure that they do not play with the appliance.
Possible Reason or indication
There are some impurity in the
grinder
Grinding coefficient is excessively high
Adjust the grinding coefficient
Brewing unit is not in original position
The steam/hot water nozzle is blocked
To avoid scalding, make sure the machine has been power off
Possible Fix
Contact factory or authorized
dealer
Adjust grinder.use a little
thick coffee powder
Close the brewing door,
restart the machine, brewing
unit will return in original
position
Dredge the nozzle with
needle
EN
43