Swann Alpha Serie Manual De Instrucciones página 8

MOUNTING THE DEVICES
Indoor Alarm Receiver
• The Indoor Alarm Receiver can be completely freestanding or mounted. The
operating distance between the Indoor Alarm Receiver and the Alert Sensor/
Doorbell is up to 100ft/30m but the range may vary depending on local conditions.
• As it is also completely freestanding, you may find it more convenient to place it on
a shelf or table. One of the benefits of a battery-powered wireless receiver is that
if you have a large house, you can bring the receiver with you. No more missing
visitors because you were all the way at the back of the house.
• If you would like to mount the Indoor Alarm
Receiver, simply attach two screws to the
wall using the supplied mounting template
as a guide (if mounting on drywall/masonry,
install wall anchors first). Do not insert the
screws all the way in but leave a small gap
between the screw head and wall so that
you can hang the Indoor Alarm Receiver on
the screws using the keyhole slots on the
back of the Indoor Alarm Receiver.
Alert Sensor
• The Alert Sensor, under typical conditions, is designed to detect people and vehicles
moving within the detection area of up to 13ft/4m. The LED indicator blinks once
when movement is detected.
• For optimal coverage, mount the Alert Sensor approximately 6.5ft/2m above the
ground, pointing slightly downwards at an angle where the most likely approach
path of visitors and vehicles is across the front of the Alert Sensor. Motion
detection is less effective when movement is directly towards or away from the
front of the Alert Sensor.
• Avoid placing the Alert Sensor in a position where it will face direct sunlight, objects
that produce heat such as fireplaces, heaters and air conditioners, or reflective
surfaces such as windows which can cause sunlight to be reflected onto the PIR
detector.
• Avoid mounting on surfaces that can move or vibrate.
(Actual detection range is subject to
EN
environmental conditions)
8
13 ft / 4m
More sensitive Less sensitive