Ring Automotive REINVP600 Guia Del Usuario página 3

5. OPERATION
1. Ensure that the inverter power on/off switch is in the OFF (0) position.
2. Plug the appliance into the AC output socket on the inverter, ensuring it does not exceed the maximum
output power of the inverter
3. Turn the power on/off switch to the ON (I) position.
4. The Power indicator will illuminate green and mains power will be available from the AC output socket(s)
6. INDICATORS & WARNINGS
Power: Illuminates green to show the unit is switched on and power is available from the AC output
socket(s)
Over load: Illuminates red if the units has been overloaded due to excessive current or a short circuit
Over temperature: Illuminates yellow if the unit has overheated
Audible alarm: An alarm sound will be heard if the unit has switched off due to a fault
Power Overload
Indicator Indicator
Green Off
Orange Off
Red Off
Red Red
Red Off
7. SPECIFICATIONS
Model
Continuous Power (up to 12 hours)
Surge Power (up to 1 second)
Output Voltage
Output Frequency
Output Waveform
Input Voltage Range
Efficiency
No Load Current Draw
RCD tripping *
Low Battery Alarm
Low Battery Shutdown
Thermal protection
USB Port
Dimension (L x W x H)
Weight
* - only fitted to models RINVPR1000/RINVPR1024/RINVPR2000/RINVPR2024
36pp A5 (PSW) EURO Quick Start Handbook v4.indd 3
Over
Temperature
Indicator Fault Modes
Off Normal Operation
Off Low voltage warning
Off Low voltage shutdown
High voltage shutdown
Off Overload
Short circuit
Yellow Over temperature
12volt:
24volt:
12volt:
24volt:
12volt:
24volt:
12volt:
24volt:
255 x 225 x 91
Action
-
Check for low battery voltage.
Check cable connections are not loose.
Reduce load if possible to extend battery life.
Switch inverter off, re-charge battery then switch back
on. Check battery voltage is correct for inverter model i.e.
24volt battery > 24volt inverter.
Disconnect all loads, switch inverter off then back on.
If overload indicator is now off:
1. Total load exceeded inverters continuous rating.
2. Appliance startup current exceeded inverters surge rating.
3. A connected appliance may have an
electrical fault, test appliances before re-connecting
Check for adequate ventilation around inverter
Check inverter cooling fans are working.
600 Watt 1000 Watt
600W 1000W
1200W 2000W
230V AC±10%
50Hz
Pure Sine Wave
10V - 16V
20V - 30V
> 85%
< 0.6amp < 1.3amp
- < 1.0amp
- 30mA
10.5 ± 1 volt
21.0 ± 1 volt
10.0 ± 1 volt
20.0 ± 1 volt
60± 10
2amp (max) 2amp (max)
394 x 224 x 96
3.5kg 6.3kg
3
2000 Watt 3000 Watt
2000W 3000W
4000W 6000W
< 1.5amp < 1.5amp
< 1.0amp -
-
o C
- -
385 x 290 x 96 520 x 286 x 96
7.7kg 10.8kg
07/04/2014 09:53