Ring Automotive REINVP600 Guia Del Usuario página 2

Instructions
1. CONTENTS
1. Inverter
2. FEATURES
1
1
1. Mains 230V AC outlet(s)
2. Power on/off switch
3. Power indicator
4. Over load indicator
5. Over temperature indicator
3. SAFETY
- Installation should be carried out by a qualified electrician
- Do not expose the unit to moisture or flammable materials
- Do not remove the unit cover, dangerous voltages are present
4. INSTALLATION
1. Ensure that the inverter power on/off switch is in the OFF
(O) position.
2. To protect inverter terminals against short circuit, protective
covers are provided. Note:- for rubber versions these should be
slid onto the cables prior to fixing to rear of inverter
3. Attach the black (-) cable to the black (-) terminal on the rear
face of the inverter and to the black (-) terminal on the battery
4. Attach the red (+) cable to the red (+) terminal on the rear
face of the inverter and to the red (+) terminal on the battery
5. To help protect against short circuit, it is recommended an in-line fuse be fitted near the positive battery
post (optional)
6. Ensure the inverter is earthed by connecting a cable from the inverter earthing bolt to a suitable earth
within the installation (normally the vehicle chassis)
36pp A5 (PSW) EURO Quick Start Handbook v4.indd 2
3
4
5
2
6
6. Remote control socket*
7. USB Port*
8. Battery positive (+) connection
9. Battery negative (-) connection
10. Earth connection
2. Connecting cables
9
8
7 11
11. Cooling fan(s)
* - Only fitted on certain models
2
3. Battery Clamps
4. Protective Covers
11
10
07/04/2014 09:53