Beper P304CAP001 Manual Del Usuario página 8

Like all products of this category, when used for the first time or on particularly sensitive skin, it
may cause slight irritation.
Description of the product Fig. A
1. Handle
2. Shaving head
3. ON/OFF switch button
4. Charging light
5. USB cable port
6. Trimming comb 1 (1.5mm )
7. Trimming comb 2 (3 mm)
8. Trimming comb 3 (6 mm)
9. Trimming comb 4 (9 mm)
10. Cleaning brush
11. Lubrication oil
Before use
Before using the product, charge it completely, making sure it is switched off.
To charge fully the product will take approx. 2 hours.
To avoid damaging or compromising battery operation, do not charge it in places with temperatures
below 10 ° C or higher than 30 ° C.
Check always the integrity of the shaving head and of trimming combs before use.
Put the product in the charging base, insert the adapter into the charging base, and connect it to
the power outlet.
If the product is properly placed the charging light will turn and remain red until the charge is com-
pleted, when the light becomes green.
At this point, disconnect the adapter from the power outlet and from charging base.
The product fully charged will have an operating autonomy of about 60 minutes.
Lift the plastic cover that protects the UBS cable port.
Insert the battery charger into the appropriate socket and then connect it to a USB socket.
The red charging light will start flashing until charging is complete, once finished the light will turn blue.
At this point disconnect the charger.
The fully charged product will have an operating autonomy of about 60 minutes.
Operation
The product is equipped with 4 different trimming combs. Depending on the desired cutting length,
choose the appropriate trimming combs.
During first use, take care to do slow and delicate movements and to use the longer trimming
comb (9mm).
Remove the blade cover and place the desired trimming comb over the head first on the front and
then press slightly downwards, until you hear a click and the comb will be fixed. Fig. B
Press the power button placed on the base of the product.
Start moving the product with slow and delicate movements, making sure that the shaving direction
is opposite to the hair growth.
Caution: Not all hairs grow in the same direction, so you may need to change the
direction of use several times while using the appliance.
When finished, turn off the product by pressing the power button again.
8