EMPTYING THE WATER CONTAINER
During the process of cooling, some water will be extracted from the air into the
unit. Most of this water is used to cool the unit and make it run more efficiently.
This is a feature not found in most portable air conditioners.
If the unit is operated in VERY HUMID air, water will collect in the container
inside the unit. If the water container is full, the compressor will stop, but the fan
will continue to circulate the air. The
empty the internal container. To make the cooling function work again, empty this
container– must be emptied.
Switch off the unit and remove the plug from the mains.
• Position a flat container or dish on the floor
under the drain hole. Do not allow the water
to drip continuously into the container as it
might easily overflow.
• Remove the drain knob.
• Remove the rubber plug, the water will flow
in the container. When this is nearly full,
replace the plug to stop the water flow and
empty it. Repeat this process until all water
has been removed.
• Replace the rubber plug into the drain hole firmly, the
flash any longer.
• Replace the drain knob.
All manuals and user guides at all-guides.com
warning light will flash to inform you to
Rubber plug
Drain knob
warning light should not
GB
9