Amcor AF 8000E Manual Del Usuario página 7

OPERATION
4
1. ON/OFF
Press the / -button to switch the unit on or off.
ON OFF
2. Setting the timer
Press the -button to set the operating hours (1 to 12 hours, 1 hour each press).
When set, the
LED
When the set hours have elapsed, the unit will turn off automatically. The display
will show the hour(s) remaining when you press the
By pressing the -button but without turning the unit on, you can pre-set in how
many hour(s) the unit will switch on automatically.
3. Setting the operating mode
Select the required operating mode: cooling , fan
will lit. In mode the unit will select cooling or fan depending on the ambient
LED AUTO
temperature.
4. Fan speed
Select the fan speed, the corresponding
5. Temperature setting, increase
When the unit is ON the display
operating mode, fan speed, timer is on.
Press button or
range from 17 °C to 32 °C – with the
seconds the room temperature will be displayed.
Warning lights and
When the water container is full, the unit automatically stops, the warning light
will flash to signal that the container must be emptied.
When the unit is cooling, the compressor light
All manuals and user guides at all-guides.com
2
will light up.
LED
(up) or decrease
shows the ambient temperature, and any
to see the set temperature and adjust if necessary – in the
and
COMP
5 3
-button.
or . The corresponding
AUTO
will lit: - low or
(down)
buttons (1 °C each press). After a few
will be on. If this light is off
COMP
GB
1
- high.
of
LED
7