AVM FRITZ!DECT 200 Instalación Y Funcionamiento página 4

LEDs
LED Condition Meaning
off > Socket is switched off
On/Off
on > Socket is switched on
fl ashing > Transmitting fi rmware update to FRITZ!DECT Repeater 200.
(Depending on the progress of the fi rmware update, the LED
is off or fl ashing.)
fl ashes > FRITZ!DECT 200 switched off the integrated socket
briefl y at regu- because the permitted amperage was exceeded. For more
lar intervals information, see also p.14.
DECT
on > FRITZ!DECT 200 is registered with the FRITZ!Box.
fl ashing > Registering with FRITZ!Box.
fl ashes > FRITZ!DECT 200 is not connected to the FRITZ!Box.
briefl y at regu- FRITZ!DECT is either not registered, or it is outside the
lar intervals FRITZ!Box range.
6
Registering with FRITZ!Box
1. Insert the FRITZ!DECT 200 in an outlet
near your FRITZ!Box.
The "DECT" LED fl ashes regularly.
2. Within two minutes, press the "DECT"
button on your FRITZ!Box. Hold the but-
ton down until the "Info" or "DECT" LED
on the FRITZ!Box begins fl ashing.
FRITZ!DECT 200 is registered with the base
station. The wireless connection has been
established when the "DECT" LED lights up.
D ECT DE DECT D D D ECT E CT W LAN W WLAN N
DE DECT E CT
W W W L W W WLAN L AN
10 seconds
If "DECT" continues to fl ash, regis-
tration was not successful. Remove
FRITZ!DECT 200 from the power
outlet and repeat the registration
process.
7