Button Function - AVM FRITZ!DECT 200 Instalación Y Funcionamiento

Security
 FRITZ!DECT 200 is intended for indoor
use only.
 FRITZ!DECT 200 is intended for operation
in a dry location that is free of dust,
protected from direct sunlight, and well
ventilated.
 Insert FRITZ!DECT 200 into an electrical
outlet that is easy to reach.
 FRITZ!DECT 200 devices cannot be
plugged together.
 FRITZ!DECT 200 can be subjected to a
maximum load of up to 2300 W/10 A,
the specifi ed output limit.
 Overloading can damage FRITZ!DECT 200
and result in malfunction or an electrical
accident.
 No devices that present a risk of fi re
may be operated unsupervised at the
FRITZ!DECT 200 socket. Such devices
include electric irons and radiant
heaters.
 Never let liquids get inside FRITZ!DECT
200.
 FRITZ!DECT 200 may not be altered,
converted, modifi ed or repaired except
by a qualifi ed technician.
 Frequent switching can shorten the ser-
vice life of electrical devices. Confi gure
automatic switching at frequent intervals
in FRITZ!DECT 200 only if the connected
devices are designed for such operation.
No liability will be accepted for corre-
sponding damage to these devices.
4
Requirements
To operate your FRITZ!DECT 200 you need:
 a230 V socket
FRITZ!Box models that include a
DECT base station (except FRITZ!Box
7312/7412) and the latest FRITZ!OS
Buttons
FRITZ!DECT has 2 buttons with LEDs
Button Function
On/Off > Switches the socket on
and off .
DECT > Deregisters from FRITZ!Box:
Hold the button down for at
least 6 seconds.
> Registers with FRITZ!Box:
Press the button until the
LED begins fl ashing. Then
press the DECT button on
the FRITZ!Box (see also
page 7).
5