Residual Risks; Assembling Instructions; Attaching/Adjusting The Carrying Strap; Mounting The Anti-Vibration Handle - Grizzly Tools AKHS 20 Set Traducción Del Manual De Instrucciones Origina

Residual risks

Even if properly operating and handling
this electric tool, some residual risks will
remain. Due to its construction and build,
this electric tool may present the following
hazards:
a) Cuts
b) Ear damage if working without ear
protection.
c) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held
or maintained properly.
Warning! During operation, this
electric tool generates an electro-
magnetic field which, under cer-
tain circumstances, may impair the
functionality of active or passive
medical implants. To reduce the
risk of serious or lethal injuries,
we recommend that persons with
medical implants consult their doc-
tor and the manufacturer of their
medical implant before operating
the machine.

Assembling instructions

Turn off the appliance and, before
doing any servicing, remove the
battery.
If the tubes of the device are not
fitted into each other and are cor-
rectly locked, the device cannot
be switched on. A safety switch
prevents operation!
Use only original parts.
1. Attach the snap hook of the carrying
strap (17) to the carrying eye (12) on
the device.
2. Put on the carrying strap (17) (see im-
A B C D
age
3. Adjust the strap length such that the
K L M N
carrying eye (12) is at hip height.
4. In addition, you can adjust the
U V W X
height of the eyelet for the shoulder
strap (12) on the telescopic tube after
loosening the Phillips screw on the
eyelet.
1.Loosen the two screws on the un-
derside of the anti-vibration handle (5)
using the Allen key (16).
2.Attach the anti-vibration handle (5)
on the telescopic tube (4).
Working with the telescopic tube:
• Open the operatung unit lock (11).
Insert the telescopic tube (4) together
with the operating unit (6) as far as
they will go.
Only one position is possible.
Close the operating unit lock (11).
• Open the cutting head lock (14). Push
the telescopic tube (4) together with
the cutter head (2) as far as they will
go.
Attaching/adjusting the
carrying strap
E F G
).
O P Q
Y Z
Mounting the anti-vibra-
tion handle

Mounting the attachments

Danger of pinching!
Make sure that the bolts
( 14/11) are firmly and securely
in place before you turn on the
unit.
GB
H I J
R S T
69