Work And Safety Instructions; General Information; Mechanical System - Festo 571813 Instrucciones De Utilizacion

EduTrainer 24 V power supply unit

5 Work and safety instructions

5.1 General information

5.2 Mechanical system

30
•
Trainees should work with the components and systems only under the supervision
of an instructor.
•
Observe the specifications included in the datasheets for the individual
components, and in particular all safety information!
•
Wear your personal protective equipment (safety goggles, safety shoes) when
working on the circuits.
• Switch off the power supply!
– Switch off both the operating power and the control power before working on
the circuit.
– Only reach into the setup when it is at a complete standstill.
– Be aware of potential overtravel times for the actuators.
• Risk of injury during troubleshooting!
Use a tool such as a screwdriver when actuating mechanical limit switches.
•
Mount all of the components securely on the profile plate.
•
Set all components up so that it's easy to activate the switches and interrupters.
•
Follow to the instructions regarding positioning of the components.
CAUTION
WARNING
CAUTION
© Festo Didactic 8049693