Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Fog Lamp Kit - Full Size SUV and GMC
Sierra (New Body Style), 2007 and Beyond
Included in the kit
Fog Lamp Wiring Harness
Fog Lamp Switch
Right and Left Fog Lamp Assembly
Tie Straps (Quantity 6)
Required tools
7mm Socket
10mm Socket
Flat-Bladed Plastic Trim Tool
Installation Instructions:
1. Turn off all lamps and accessories.
2. Turn the ignition off.
3. Open hood.
4. Loosen the negative cable nut.
5. Remove the negative battery cable from the battery terminal.
6. Reposition the negative battery cable away from the battery.
For vehicles with RPO SLT instrument panel.
7. Remove headlamp switch trim plate assembly from instrument
panel (1). Figure 1
FIGURE 1
8. Disconnect the electrical connector to the headlamp switch (2).
9. Remove headlamp switch from trim plate assembly.
Go to Step 17
Fog Lamp Kit
ALL INFORMATION WITHIN
DATE
ABOVE BORDER TO BE PRINTED
EXACTLY AS SHOWN ON 8.5 x 11
31JL07
WHITE 16 POUND NON-BOND
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCOR-
DANCE WITH GMSPO SPECIFI-
CATIONS.
REVISION
I
For vehicles without RPO SLT instrument panel.
10. Remove park brake release handle bolt (1). Slide park brake
release handle forward to remove from knee bolster. Figure 2
FIGURE 2
11. Remove left side instrument panel outer trim cover (1).
Figure 3
FIGURE 3
12. Remove knee bolster screws (2).
13. Remove knee bolster from instrument panel (3).
14. Remove left side instrument panel switch trim plate assem-
bly from instrument panel (1). Figure 4
FIGURE 4
PART NO.
IR 31JL07
INSTALLATION INSTRUCTIONS
AUTH
DR
TITLE
PART NO.
19170448
6200 Grand Pointe Dr., Grand Blanc, MI 48439
19170448
SHEET
Fog Lamp Kit
1
SHEET
1
15
OF
15
OF
loading

Resumen de contenidos para GM 19170448

  • Página 11 FIGURA 4 8. Desconecte el conector eléctrico del interruptor del faro (2). 9. Retire el interruptor del faro del ensamble de la placa de acabado. Diríjase al Paso 17 PART NO. 19170448 Fog Lamp Kit IR 31JL07 SHEET INSTALLATION INSTRUCTIONS...
  • Página 12 Para vehículos con panel de instrumentos SLT de RPO. 19. Instale el ensamble de la placa de acabado del interruptor del faro al panel de instrumentos. Figura 6 FIGURA 8 FIGURA 6 PART NO. 19170448 Fog Lamp Kit IR 31JL07 SHEET INSTALLATION INSTRUCTIONS ALL INFORMATION WITHIN...
  • Página 13 Saque el cableado de la luz antiniebla fuera de la parte delantera del soporte del bloque de conexiones debajo del cofre y fije al arnés de la luz antiniebla. PART NO. 19170448 Fog Lamp Kit IR 31JL07 SHEET INSTALLATION INSTRUCTIONS...
  • Página 14 Los sujetadores del conducto de la luz antiniebla podrían necesitar ajuste para alinearnos con los agujeros del radiador. Figura 16 FIGURA 16 PART NO. 19170448 Fog Lamp Kit IR 31JL07 SHEET INSTALLATION INSTRUCTIONS ALL INFORMATION WITHIN...
  • Página 15 42. Retire las tapas del salpicadero de la luz antiniebla del lado Orientación de la luz antiniebla, Documento N°. de derecho e izquierdo al liberar los brazos de retención. identificación 1688536 Figura 18 FIGURA 18 PART NO. 19170448 Fog Lamp Kit IR 31JL07 SHEET INSTALLATION INSTRUCTIONS ALL INFORMATION WITHIN DATE...