Enlaces rápidos
1. Assemble Hose To Tank
IMPORTANT: Do not attempt to heat or alter
hose, hose nut, or barb prior to assembly.
. Align hose barb tabs, push hose barb into tank
1
until it stops (See Figure A).
2. Slide hose nut into place and turn clockwise to
tighten. (See Figure B).
NOTE: Do not use tools to tighten hose nut.
2. Assemble Wand & Nozzle
Place nozzle onto the end of the
wand assembly and tighten securely.
(See Figure C)
3. Assemble Shut-off to Wand
Screw on Wand Assembly to end of Shut-off
and tighten securely. (See Figure D)
QUICK START GUIDE
SETTING UP YOUR R200 SPRAYER
190462
Figure A
Configuration for
nozzle tip sprayers
Figure B
Figure C
Figure D
Manuales relacionados para Smith Performance Sprayers R200
Resumen de contenidos para Smith Performance Sprayers R200
- Página 1 QUICK START GUIDE SETTING UP YOUR R200 SPRAYER 190462 1. Assemble Hose To Tank IMPORTANT: Do not attempt to heat or alter hose, hose nut, or barb prior to assembly. . Align hose barb tabs, push hose barb into tank until it stops (See Figure A).
- Página 2 PARTS INCLUDED WITH YOUR R200 SPRAYER 190462 183173 SHUT-OFF ASSEMBLY 182112 21” SS WAND ASSEMBLY 182187 181823 180097 180168 181826 HIGH FOAM ADJUSTABLE NOZZLE TIP NOZZLE TIP 25 PSI PRESSURE NOZZLE NOZZLE BRASS HIGH VOLUME LOW VOLUME REGULATOR (RED) (YELLOW)