Technical Data - Blanco MASTER ILUX Instrucciones De Montaje Y Mantenimiento

Installation and care instructions
GB
We have put together the most important product information
to enable you to benefit from the high degree of functionality and the
first class comfort provided by BLANCO taps.
Parts list BLANCO MASTER ILUX HD
1 Lever
2 Fixing screw
Screw cover
3
Cartridge retaining ring
4
Cartridge
5
6 Spout
7 Fixing screw
Base Ring
8
Set O-rings
9
Jet regulator
10
11 Fixing kit
Stabilisation triangle
12
13 Flexi-hose
seals for flexible hose
14
turbine unit
15
16 flexible hose turbine unit
17 seals for flexible hose
18 fitting kit turbine unit

Technical data

Use
• Pressurised hot water tank and instantaneous water
heater
• Not suitable for low pressure hot water tank/ hot
water tank
Operating pressure
• Min. 0.5 bar
• Max. 10.0 bar
Temperature
• Max. 70° C
Note
pressure differences between cold and warm water
connection should be less than 3 bar otherwise the
mixing ratio deviates from the lever position.
Symbols
right wrong recommended
Installation
Illustrations
1 Tap hole: 35 mm
- Attach tap
2 4
NOTE: don't forget the seal between tap
and supporting surface!
5 Flush the pipe work to remove foreign debris from
the system. When the tap has been connected
check for leaks,movement and flow rate/pattern.
Important: fit the enclosed dirt filter to corner valves
6
- Connect flexi hoses
7 12
further illustrations on the back fold-out flap
When tap has been fitted check:
tightness, movement, full jet of water
Care
Please note the following advice and the illustrati-
ons on the back fold-out flap.
Illustrations
- Use soft (microfibre) cloth and mild cleaning
13 15
agent
- Take care with hard objects
16 17
18 - 20 Cleaning the perlator/ jet regulator with vinegar
Important
in the event of a query, please enter the 11-digit Article
Number (see wrapper on the cold water hose of your
tap) .
Example
n s o n b u y in g
C o n g ra tu la ti o
ta p – w e h o p
th is B L A N C O
a re d e li g h te d
e y o u
w it h it !
2