Volume Adjustment - Hama DIR3020BT Manual De Instrucciones

5.1 General notes on use
5.1.1 Switch On / Off / Standby
• Press [POWER/VOLUME/ENTER/NAVIGATE] (9) to
switch on the radio.
• Press and hold [POWER/VOLUME/ENTER/NAVIGATE]
(9) for 3 seconds to switch the radio off (standby).
• To completely switch off the device, disconnect it from
the power supply.
5.1.2 Navigation and control
• After pressing a shortcut button, navigate through the
menu items using.
• Select the individual menu items by turning [POWER/
VOLUME/ENTER/NAVIGATE] (9).
• Con rm the selection by pressing [POWER/VOLUME/
ENTER/NAVIGATE] (9).

5.1.3 Volume adjustment

• Turn the volume up (right) or down (left) by turning
[POWER/VOLUME/ENTER/NAVIGATE] (9) accordingly.
5.2 Switching on
Warning
• Only operate the product from a socket that has been
approved for the device. The socket must be installed
close to the product and must be easily accessible.
• Disconnect the product from the power supply using
the On/Off switch – if this is not available, unplug the
power cord from the socket.
• If using a multi-socket power strip, make sure that the
total power consumption of all connected devices does
not exceed the power strip's maximum throughput
rating.
• If you will not be using the product for a prolonged
period, disconnect it from mains power.
• Connect the power supply to the mains connection (1) on
the back of the radio.
• Connect the power cable to a properly installed and
easily accessible power socket.
• Wait until the radio has initialised fully.
• Press [POWER/VOLUME/ENTER/NAVIGATE] (9) to
switch on the radio.
4
Note – switching on for the rst time
• The Setup Wizard starts up automatically when the
radio is turned on for the rst time.
• The default used language is English.
• You can skip the Wizard and start it up again later in
German.
5.3 Language
The rst time it is used, the radio's default language is
English. To change radio's menu language, proceed as
follows:
• Press [ ] (4) to access the Settings menu.
• Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to
navigate to the "Settings" menu item.
• Con rm the selection by pressing [POWER/VOLUME/
ENTER/NAVIGATE] (9).
• Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to
navigate to the "Language" menu item. Con rm the
selection by pressing [POWER/VOLUME/ENTER/
NAVIGATE] (9).
• Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to select
your preferred system language.
• The language setting currently selected is marked with
an asterisk (*).
Note
• You can choose from the following languages:
English, German, Danish, Dutch, Finnish, French,
Italian, Norwegian, Polish, Portuguese, Spanish,
Swedish,Turkish, Czech and Slovak.
6. Care and Maintenance
• Only clean this product with a slightly damp, lint-free
cloth and do not use aggressive cleaning agents.
• If you do not plan to use the product for a prolonged
period, turn off the device and disconnect it from the
power supply. Store it in a clean, dry place away from
direct sunlight.