Technical Data - Blanco LINUS-S Instrucciones De Montaje Y Mantenimiento

Installation and care instructions
GB
We have put together the most important product information
to enable you to benefit from the high degree of functionality and the
first class comfort provided by BLANCO taps.
Parts list BLANCOLINUS-S ND / ND
Lever
1 1
2 2 Cap on lever + Screw on lever
3 3 Cartridge retaining ring
Cartridge
4 4
Shower head
5
Jet regulator
6 6
7 Spray hose
8 Spout
Spout
8
Set of O rings
9
Set of O rings
9
10 10 Spout retaining screw
11 11 Base Ring
12 Spray hose seal top
Fixing kit
13 13
Assembly nut
14
15 15 Flexi-hose
16 Weight
17 17 Non-return valve /
Flow control with housing
Non-return valve /
18 18
Flow control combination
19 T-piece + Non-return valve /
Flow control with housing
Adapter shower hose
21
Stabilisation triangle
22 22
Spray hose seal bottom
23
24 Fixing stud
25 Flexi-hose short
Flexi hose, 1 pair
26

Technical data

Use
• Low pressure store and boilerr
• Not suitable for pressurised hot water
tank / continuous flow water heater
Operating pressure
• Min. 0.5 bar
• Max. 10.0 bar
Temperature
• recommended 60° C
• maximum 80° C
Symbols
right wrong
Installation
Illustrations
1 Tap hole: 35 mm
2 -
Rinse through corner valve
5
6 Recommendation: fit dirt filter
further illustrations on the back fold-out flap
Overview connection low-pressure fitting with
7
shower hose
8 Overview connection low-pressure fitting with fixed
spout
–
9 13
–
14 16
17 Rinse perlator/ jet regulator
When tap has been fitted check:
tightness, movement, full jet of water
Care
Please note the following advice and the
illustrations on the back fold-out flap.
Illustrations
18 - 20
-
21 22
-
23 26
-
27 29
Important
in the event of a query, please enter the 11-digit Article
Number (see wrapper on the cold water hose of your
tap) .
Example
recommended
th is B L A N C O
4 Attach tap
NOTE: don't forget the seal between tap
and supporting surface!
Connect flexi hoses
Spray hose guide
Use soft (microfibre) cloth and mild cleaning
agent
Take care with hard objects
Using the hose spray
Cleaning the perlator/ jet regulator with vinegar
n s o n b u y in g
C o n g ra tu la ti o
e y o u
ta p – w e h o p
w it h it !
a re d e li g h te d
2