DeWalt DE9135 Traducido De Las Instrucciones Originales página 19

Package Contents
The package contains:
1 Battery charger
1 Instruction manual
NOTE: Battery packs, chargers and kitboxes are not
included with N-models.
• Check for damage to the charger, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
DATE CODE POSITION
Date Code, which also includes the year of
manufacture, is printed into the housing base below
the rating label!
Example:
2014 XX XX
Year of Manufacture
Chargers
Be sure to read all safety instructions before using
your charger.
Charging Procedure (fi g. 1)
DANGER: Electrocution hazard.
230 volts present at charging terminals.
Do not probe with conductive objects.
Danger of electric shock or
electrocution.
1. Plug the charger into an appropriate outlet
before inserting battery pack.
2. Insert the battery pack into the charger. The red
(charging) light will blink continuously indicating
that the charging process has started.
3. The completion of charge will be indicated by
the red light remaining ON continuously. The
pack is fully charged and may be used at this
time or left in the charger.
Charging Process
Refer the table below for the state of charge of the
battery pack.
State of charge
charging
fully charged
hot/cold pack delay
replace battery pack
problem
Automatic Refresh
The automatic refresh mode will equalise or balance
the individual cells in the battery pack at its peak
capacity. Battery packs should be refreshed weekly
or whenever the pack no longer delivers the same
amount of work.
To refresh your battery pack, place the battery in the
charger as usual. Leave the battery pack for at least
8 hours in the charger.
Hot/Cold Pack Delay
When the charger detects a battery that is too hot
or too cold, it automatically starts a Hot/Cold Pack
Delay, suspending charging until the battery has
reached an appropriate temperature. The charger
then automatically switches to the pack charging
mode. This feature ensures maximum battery life.
DEEP DISCHARGE PROTECTION
The battery pack is protected against deep
discharging when it is used in the tool.
Storage Recommendations
1. The best storage place is one that is cool and
dry away from direct sunlight and excess heat
or cold.
2. Long storage will not harm the battery pack or
charger. Under proper conditions, they can be
stored for 5 years or more.
Description (fi g. 1)
INTENDED USE
Your DE9135 charger accepts 7.2 – 18V NiCd,
NiMH or Li Ion batteries. These chargers require
no adjustment and are designed to be as easy as
possible to operate.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
DO NOT let children come into contact with the
charger. Supervision is required when inexperienced
operators use this charger.
• This product is not intended for use by persons
(including children) suffering from diminished
physical, sensory or mental abilities, or for lack
– – – – – –
of experience and/or for want of knowledge or
––––––––––– skills unless they are supervised by a person
responsible for their safety. Children should
––– – ––– –
never be left alone to play with this product.
•••••••••••
•• •• •• ••
WARNING: Never modify the charger
or any part of it. Damage or personal
injury could result.
EN GL IS H
17