Transport And Storage - sunjoe SJPPH48 Manual Del Operador

3. Through the observation window, spoon or brush several
drops (or use squirt bottle) of the solution onto the
automatic valve connection and the injector connection.
(Fig. 18).
Observation
window panel
4. Through one of the holes on the upper pole, spoon, squirt
or brush several drops of the solution onto the propane
hose connection (Fig. 19).
Spoon, squirt
or brush the
solution through
the hole
5. Open the gas cylinder valve. Inspect the connections and
look for bubbles.
6. If no bubbles appear, the connection is safe. If bubbles
appear, there is leakage. Loosen and re-tighten this
connection. If there is still a leak, turn off the cylinder
and contact the Snow Joe
center at 1-866-SNOWJOE (1-866-766-9563).

Transport and Storage

DO NOT move or store this heater until it is COMPLETELY
extinguished and cooled down.
Between Uses:
1. Turn the lighting knob to "OFF" position.
2. Close the propane cylinder valve.
3. Store the heater upright in an area sheltered from direct
contact with inclement weather (such as rain, sleet, hail,
snow, dust and debris).
Fig. 18
Automatic valve
connection
Injector
connection
Fig. 19
Propane hose
connection
+ Sun Joe customer service
® ®
4. If desired, cover the heater to protect exterior surfaces
and to help prevent build up in air passages.
NOTE: Wait until heater is cool before covering.
Transporting:
1. Turn the lighting knob to "OFF" position. Close the
propane cylinder valve.
2. Disconnect the propane hose from the cylinder by turning
the connector counterclockwise. Remove the propane
cylinder from the tank.
3. Wait until heater is completely cooled down before
moving.
4. Before using the heater in the new location, connect
the propane cylinder and perform the leakage test as
instructed before.
Long-term storage:
1. Turn the lighting knob to "OFF" position. Close the
propane cylinder valve.
2. Disconnect the propane hose from the cylinder by turning
the connector counterclockwise. Remove the propane
cylinder from the tank. Store the cylinder in a secure, well-
ventilated location outdoors. DO NOT store in a location
where the temperature will exceed 125 ºF.
3. Store heater upright in an area sheltered from direct
contact with inclement weather (such as rain, sleet, hail,
snow, dust and debris).
4. If desired, cover the heater to protect exterior surfaces
and to help prevent build up of dust in air passages.
NOTE: Wait until heater is cool before covering.
Support
If your Sun Joe SJPPH48 outdoor patio heater requires
®
service or maintenance, please call 1-866-SNOWJOE
(1-866-766-9563) for assistance.
Model and Serial Numbers
When contacting the company, reordering parts, or arranging
service from an authorized dealer, you will need to provide
the model and serial numbers, which can be found on the
decal located on the unit. Copy these numbers into the space
provided below.
Record the following numbers from your new product:
Model #:
S J P P H 4 8 -
Serial #:
11