Tabla de contenido
Idiomas disponibles
Idiomas disponibles
3. Install cam lock pins (A) and dowels (C) in
side panels (4 & 5). Insert cam locks (B) into
corresponding holes in back panel (1), bottom
panel (2), skirt panel (3) and top support beams
(10 & 11). Fit side panels together with back panel,
bottom panel, skirt panel and top support beams
and turn each cam lock clockwise until it locks.
(See Figure 3)
4. Mount floor glides (D) on side panels. Floor glides
can be adjusted to compensate for uneven floors.
(See Figure 3)
Figure 3
10
11
4
5. Press female component of shelf supports (E) into
corresponding grooves in shelf (7). (See Figure 4)
Figure 4
PAGE 3 OF 15
ASSEMBLY CONTINUED
3
5
D
2
C
B
1
J, L
7
E
6. Set cabinet upright. Install male component of four
shelf supports (E) in holes at same height on side
panels (4 & 5) inside of cabinet. (See Figure 5)
Figure 5
7.
Slide shelf in above shelf supports (E) and set it down,
ensuring it is level and seated securely. (See Figure 6)
A
Figure 6
Open cartons for H-5711 to assemble pedestal
files in steps 8-10.
5
4
7
E
1121 IH-8224
Tabla de contenido
