Tabla de contenido
Enlaces rápidos
INSTRUCTIONS & PARTS LIST FOR SSD4P PISTOL SERIES
STALL DRIVE, POSITIVE CLUTCH, TORQUE CONTROL & ADJUSTABLE CLUTCH SCREWDRIVERS
Read and understand these instructions before operating this tool.
Everyone using, maintaining, changing accessories or working near this tool must read, understand and follow these Safety Instructions!
Screwdrivers can cause flying particles.
Proper eye protection must be worn at all times by tool user and bystanders.
Flying particles can cause eye injury.
Sockets, bits and adapters not made for power tools can break when used with power tools. Sockets, bits and adapters not made for
impact wrenches can break when used with impact wrenches.
Proper eye protection must be worn at all times by tool user and bystanders. Use only sockets, bits and adapters made for power
tools and that are in good condition with nutrunners, screwdrivers, pulse wrenches and ratchets wrenches. Use only impact
sockets, bits and adapters that are in good condition with impact wrenches. Keep hands away from sockets, bits and adapters.
Broken sockets, bits and adapters can cause injury.
Power tools generate noise.
Ear protection must be worn when tool noise level exceeds 85 dBA. We also recommend that ear protection be worn when the
tool noise level is below 85 dBA. See the tool's information sheet for the noise level.
Prolonged exposure to noise can cause hearing loss.
Power tools vibrate.
Excessive vibration can cause injury. If numbness, tingling, pain or whitening of the skin occurs, stop using tool and consult a
physician. See the tool's information sheet for the vibration level.
Prolonged exposure to vibration can cause injury.
Worn, chipped, or cracked sockets, bits, and adapters can break.
Do not use worn, chipped, or cracked sockets, bits, or adapters.
Broken sockets, bits and adapters can cause injury.
Screwdrivers present a risk of entanglement.
Keep loose hair away from power tools and accessories. Keep hands away from moving parts of the tool and accessories. Do
not wear jewelry, loose clothing, or neckwear around power tools. Keep work area clear of cleaning rags and all items that could
become entangled with the tool.
Entanglements can cause injuries.
Driving screws creates dust.
Do not breathe dust created when driving screws. Use approved mask.
Breathing dust created when driving screws can cause injury.
This tool is not insulated for contact with electric power sources.
Do not use near live electric circuits. When driving screws into walls, be aware that they may have hidden electric wires.
Electric shock can cause injury.
This tool is not intended for use in a flammable or explosive atmosphere.
Do not use this tool in a flammable or explosive atmosphere.
Explosions and fire can cause injury.
Sudden and unexpected tool movement can occur when the fastener bottoms on the work.
Be sure your body position allows you to have control of the tool at all times. Make sure your footing is secure. Consult
manufacturer for proper reaction bar if movement is excessive.
When using a reaction bar:
• Be aware hands or feet can be injured if bar breaks.
• Keep hands from between bar and workpiece. Hands and fingers can be injured if caught between bar and work piece.
• Follow instructions supplied with reaction bar for proper installation and use.
Sudden and unexpected tool movement can cause injury.
Tools that are used with a suspension device can fall if they are not securely fastened to the device.
If the tool is used with a balancer or other suspension device, be sure the tool is firmly attached to the device.
Falling tools can cause injury.
Using excessive force on a tool makes it hard to control.
Do not force tool.
Hard to control tool can cause injury.
Taping or wiring the throttle valve in the "ON" position will prevent the tool from shutting off if the tool should jam or malfunction or if
anything unexpected happens.
Do not wire or tape down the "On-Off" valve of any power tool.
Tools that are prevented from shutting off can cause injury.
250 Snap-on Drive • PO Box 1596 • Murphy, NC 28906 • USA • Phone: 828-835-9765 •www.siouxtools.com
Form ZCE844
SERIAL "A"
SAVE THESE INSTRUCTIONS!
WARNING
When used improperly power tools can create hazardous situations.
Improperly used power tools can cause injury or death.
SCREWDRIVER SAFETY
1
Original
Instructions
Form ZCE844
Date 2021April27/H
Page 1 of 46
2021April27/H
Date
Tabla de contenido
Manuales relacionados para SIOUX SSD4P Serie
Resumen de contenidos para SIOUX SSD4P Serie
- Página 1 Form ZCE844 Original Instructions Date 2021April27/H Page 1 of 46 INSTRUCTIONS & PARTS LIST FOR SSD4P PISTOL SERIES STALL DRIVE, POSITIVE CLUTCH, TORQUE CONTROL & ADJUSTABLE CLUTCH SCREWDRIVERS SERIAL “A” Read and understand these instructions before operating this tool. SAVE THESE INSTRUCTIONS! WARNING When used improperly power tools can create hazardous situations.
-
Página 2: Intended Use
Poorly maintained and lubricated tools can fail unexpectedly. Keep tool properly lubricated and in good repair at all times. Use only Sioux Air Motor Oil No. 288. See the tool’s information sheet to find out what other greases and oils to use. Do not drop the end of the hose on the floor where it will pick up dirt and transport it into the tool. - Página 3 If an airline lubrication is not used, it is recommended that the tool be oiled daily before use to improve performance. Add 2-4 drops of air motor oil and run the tool for 10-20 seconds to distribute oil through the tool. Lubricate the gears through the grease fitting with Sioux 1232A grease after 100 hours of operation.
- Página 4 SSD4P30SRR SSD4P3P SSD4P4P SSD4P5P SSD4P6P SSD4P7P SSD4P9P SSD4P11P SSD4P14P SSD4P16P SSD4P18P SSD4P22P SSD4P26P SSD4P30P SSD4P3PRR SSD4P4PRR SSD4P5PRR SSD4P6PRR SSD4P7PRR SSD4P9PRR SSD4P11PRR SSD4P14PRR SSD4P16PRR SSD4P18PRR SSD4P22PRR SSD4P26PRR SSD4P30PRR SSD4P3AC SSD4P4AC SSD4P5AC SSD4P6AC SSD4P7AC SSD4P9AC SSD4P11AC SSD4P14AC SSD4P16AC SSD4P18AC SSD4P22AC SSD4P26AC SSD4P30AC SSD4P3ACRR SSD4P4ACRR SSD4P5ACRR...
-
Página 5: Sicherheitshinweise Für Schrauber
Übersetzung Der Original Anleitungen BEDIENUNGSANLEITUNG UND TEILELISTE FÜR SCHRAUBER IN PISTOLENFORM DER SERIE SSD4P MIT FESTDREHANTRIEB, POSITIVER KUPPLUNG, DREHMOMENTSTEUERUNG UND JUSTIERBARER KUPPLUNG SERIE “A” Lesen Sie diese Bedienungsanleitung, bevor Sie dieses Werkzeug in Betrieb nehmen. BEWAHREN SIE DIESE ANLEITUNG AUF! WARNUNG Unsachgemäßer Gebrauch von Werkzeugen kann zu gefährlichen Situationen führen. -
Página 6: Bestimmungsgemässer Gebrauch
Sorgen Sie dafür, daß der Einschalter auf “Aus” steht, bevor Sie die Druckluft anschließen. Unerwartete Starts können zu Verletzungen führen Der Gebrauch von Zubehör, das nicht von Sioux Tools geliefert oder spezifiziert wurde, kann zu unvorhersehbaren Zwischenfällen führen. Verwenden Sie ausschließlich von Sioux Tools geliefertes oder empfohlenes Zubehör. - Página 7 Leistung eine tägliche Schmierung des Werkzeugs vor der Benutzung empfohlen. Träufeln Sie 2 bis 4 Tropfen Druckluftmotoröl ein und lassen Sie das Werkzeug für 10 bis 20 Sekunden laufen, um das Öl im Werkzeug zu verteilen. Schmieren Sie den Antrieb über die Schmiernippel mit dem Sioux- Fett 1232A nach jeweils 100 Betriebsstunden.
- Página 8 SSD4P30SRR SSD4P3P SSD4P4P SSD4P5P SSD4P6P SSD4P7P SSD4P9P SSD4P11P SSD4P14P SSD4P16P SSD4P18P SSD4P22P SSD4P26P SSD4P30P SSD4P3PRR SSD4P4PRR SSD4P5PRR SSD4P6PRR SSD4P7PRR SSD4P9PRR SSD4P11PRR SSD4P14PRR SSD4P16PRR SSD4P18PRR SSD4P22PRR SSD4P26PRR SSD4P30PRR SSD4P3AC SSD4P4AC SSD4P5AC SSD4P6AC SSD4P7AC SSD4P9AC SSD4P11AC SSD4P14AC SSD4P16AC SSD4P18AC SSD4P22AC SSD4P26AC SSD4P30AC SSD4P3ACRR SSD4P4ACRR SSD4P5ACRR...
-
Página 9: Traducción De Las Instrucciones Originales
Traducción De Las Instrucciones Originales INSTRUCCIONES Y LISTA DE PIEZAS PARA DESTORNILLADORES ANTICALADO, EMBRAGUE POSITIVO, CONTROL DE TORSIÓN Y EMBRAGUE AJUSTABLE SERIE PISTOLA SSD4P SERIE “A” Lea y entienda estas instrucciones antes de usar esta herramienta. ¡NO PIERDA ESTAS INSTRUCCIONES! ADVERTENCIA Una herramienta motorizada puede ser peligrosa si no se usa correctamente. -
Página 10: Informacion Sobre Funcionamiento Del Embraque
Siempre mantenga la herramienta lubricada correctamente y en buen estado. Utilice solamente aceite para motores neumáticos de Sioux No. 288. Ver la hoja de información de la herramienta para saber tener información sobre otros aceites o grasas que puede utilizar. No deje caer el extremo de la manguera en el suelo donde puede ensuciarse y transportar la suciedad a la herramienta. -
Página 11: Lubricación
Se recomienda un lubricador de línea de aire que dispense 2 gotas/minuto para un rendimiento y vida útil máximos. Se recomienda el aceite para motores neumáticos SIOUX No. 288. Si no se usa lubricación en la línea de aire, se recomienda que todos los días se aplique aceite a la herramienta antes de usarla para mejorar su rendimiento. - Página 12 SSD4P30SRR SSD4P3P SSD4P4P SSD4P5P SSD4P6P SSD4P7P SSD4P9P SSD4P11P SSD4P14P SSD4P16P SSD4P18P SSD4P22P SSD4P26P SSD4P30P SSD4P3PRR SSD4P4PRR SSD4P5PRR SSD4P6PRR SSD4P7PRR SSD4P9PRR SSD4P11PRR SSD4P14PRR SSD4P16PRR SSD4P18PRR SSD4P22PRR SSD4P26PRR SSD4P30PRR SSD4P3AC SSD4P4AC SSD4P5AC SSD4P6AC SSD4P7AC SSD4P9AC SSD4P11AC SSD4P14AC SSD4P16AC SSD4P18AC SSD4P22AC SSD4P26AC SSD4P30AC SSD4P3ACRR SSD4P4ACRR SSD4P5ACRR...
-
Página 13: Sicurezza Del Cacciavite
L’insufficiente manutenzione e lubrificazione degli strumenti può provocare guasti improvvisi. Mantenere sempre lo strumento adeguatamente lubrificato ed in buono stato. Utilizzare solo olio motore Sioux Air n. 288. Consultare il foglio informativo dell’utensile per determinare quali altri grassi ed oli utilizzare. Non lasciar cadere l’estremità... - Página 14 Gli apparecchi con frizione regolabile continueranno a slittare quando è stato raggiunto il valore di coppia preselezionato e possono essere fermati solo quando si rimuove l’apparecchio dalla parte girevole. Le frizioni regolabili vengono regolate esternamente usando la chiave di regolazione Sioux n.
- Página 15 Per riavviare l’utensile basta premere nuovamente il grilletto e riprendere a spingere. L’impostazione del valore di coppia si effettua esternamente usando la chiave di regolazione Sioux n. 2366 o un cacciavite a croce Phillips (3/16”, 4,8mm di diam.). Per effettuare tale regolazione ruotare il coperchio della frizione fino a raggiungere l’apposita finestrella.
- Página 16 SSD4P30SRR SSD4P3P SSD4P4P SSD4P5P SSD4P6P SSD4P7P SSD4P9P SSD4P11P SSD4P14P SSD4P16P SSD4P18P SSD4P22P SSD4P26P SSD4P30P SSD4P3PRR SSD4P4PRR SSD4P5PRR SSD4P6PRR SSD4P7PRR SSD4P9PRR SSD4P11PRR SSD4P14PRR SSD4P16PRR SSD4P18PRR SSD4P22PRR SSD4P26PRR SSD4P30PRR SSD4P3AC SSD4P4AC SSD4P5AC SSD4P6AC SSD4P7AC SSD4P9AC SSD4P11AC SSD4P14AC SSD4P16AC SSD4P18AC SSD4P22AC SSD4P26AC SSD4P30AC SSD4P3ACRR SSD4P4ACRR SSD4P5ACRR...
- Página 17 Vous assurer de lubrifier l’outil comme il se doit et le maintenir en bon état de fonctionnement. Utiliser seulement l’huile de moteur pneumatique Sioux Air Motor Oil No. 288. Consulter la fiche technique de l’outil pour connaître les autres huiles et lubrifiants recommandés.
- Página 18 Les embrayages réglables s’ajustent à l’aide d’une clé de réglage de la garde d’embrayage No. 2366 de Sioux ou d’un tournevis Phillips #1 (diamètre de tronc de 4,8 mm). Le réglage de l’embrayage s’effectue en faisant tourner le plateau de fermeture d’embrayage jusqu’à ce que la fente du carter d’embrayage apparaisse.
- Página 19 être redémarré en appuyant sur la gâchette et en appliquant à nouveau une pression. Le réglage du couple peut être ajusté de l’extérieur à l’aide de la clé de réglage d’embrayage Sioux n° 2366 ou d’un tournevis Phillips n° 1 (diamètre de tronc de 4,8 mm / 3/16 po). Le réglage du couple s’effectue en tournant le plateau de l’embrayage jusqu’à...
- Página 20 SSD4P30SRR SSD4P3P SSD4P4P SSD4P5P SSD4P6P SSD4P7P SSD4P9P SSD4P11P SSD4P14P SSD4P16P SSD4P18P SSD4P22P SSD4P26P SSD4P30P SSD4P3PRR SSD4P4PRR SSD4P5PRR SSD4P6PRR SSD4P7PRR SSD4P9PRR SSD4P11PRR SSD4P14PRR SSD4P16PRR SSD4P18PRR SSD4P22PRR SSD4P26PRR SSD4P30PRR SSD4P3AC SSD4P4AC SSD4P5AC SSD4P6AC SSD4P7AC SSD4P9AC SSD4P11AC SSD4P14AC SSD4P16AC SSD4P18AC SSD4P22AC SSD4P26AC SSD4P30AC SSD4P3ACRR SSD4P4ACRR SSD4P5ACRR...
- Página 21 Vertaling Van De Oorspronkelijke Instructies INSTRUCTIES EN ONDERDELENLIJST VOOR SSD4P PISTOL-SERIE SCHROEVENRAAIERS MET AFSLAGAANDRIJVING, POSITIEVE KOPPELING, KOPPELSTURING EN VERSTELBARE KOPPELING SERIE “A” Zorg dat u deze instructies hebt gelezen en begrepen voordat u dit gereedschap gebruikt. BEWAAR DEZE INSTRUCTIES! WAARSCHUWING Bij verkeerd gebruik kunnen elektrische werktuigen gevaarlijke situaties teweegbrengen.
- Página 22 Slecht onderhouden en slecht geölied gereedschap kan leiden tot plotselinge storingen. Zorg steeds dat de boor goed geölied en in goede conditie is. Gebruik alleen Sioux Air Motor Oil No. 288. Zie specificaties over het gebruik van andere oliën en vetten. Laat het uiteinde van de buis niet op de grond vallen, zodat stof en verontreinigende deeltjes de boor niet kunnen bereiken.
- Página 23 Voeg 2 à 4 druppels luchtmotorolie toe en laat het gereedschap 10 à 20 seconden draaien om de olie over het gereedschap te verdelen. Smeer het drijfwerk via de smeernippel met Sioux 1232A vet na 100 uur gebruik.
- Página 24 SSD4P3P SSD4P4P SSD4P5P SSD4P6P SSD4P7P SSD4P9P SSD4P11P SSD4P14P SSD4P16P SSD4P18P SSD4P22P SSD4P26P SSD4P30P SSD4P3PRR SSD4P4PRR SSD4P5PRR SSD4P6PRR SSD4P7PRR SSD4P9PRR SSD4P11PRR SSD4P14PRR SSD4P16PRR SSD4P18PRR SSD4P22PRR SSD4P26PRR SSD4P30PRR SSD4P3AC SSD4P4AC SSD4P5AC SSD4P6AC SSD4P7AC SSD4P9AC SSD4P11AC SSD4P14AC SSD4P16AC SSD4P18AC SSD4P22AC SSD4P26AC SSD4P30AC SSD4P3ACRR SSD4P4ACRR SSD4P5ACRR SSD4P6ACRR...
- Página 25 Översätt Från Original Instruktionerna ANVISNINGAR OCH DELLISTA FÖR SKRUVMEJSLAR I SSD40-PISTOLSERIEN MED STOPPDRIFT, POSITIV CLUTCH, VRIDMOMENTSREGLAGE OCH JUSTERBAR CLUTCH MODELL SSD4P SERIE “A” Läs och förstå dessa anvisningar innan du använder detta verktyg. SPARA DESSA ANVISNINGAR! VARNING Felaktig användning av motordrivna verktyg kan förorsaka risksituationer. Alla som använder, underhåller, byter tillbehör på...
-
Página 26: Avsett Användningsområde
Illa skötta och dåligt smorda verktyg kan oförutsett sluta att fungera. Håll alltid verktyget väl smort och i god funktion. Använd enbart Sioux Air Motor Oil Nr. 288. Uppgifter om andra smörjämnen och oljor som ska användas finns i informationsbladet för verktyget. Släpp inte ned änden på slangen på golvet där den kan plocka upp smuts som kan komma in i verktyget. - Página 27 Vridmomentinställningen kan justeras externt med hjälp av skruvnyckeln för clutchjustering Sioux No. 2366 eller en #1 stjärnmejsel med en diameter på 4,8 mm (3/16”). Vridmomentet justeras genom att clutchkåpan roteras tills skåran i kåpan är synlig.
- Página 28 SSD4P3P SSD4P4P SSD4P5P SSD4P6P SSD4P7P SSD4P9P SSD4P11P SSD4P14P SSD4P16P SSD4P18P SSD4P22P SSD4P26P SSD4P30P SSD4P3PRR SSD4P4PRR SSD4P5PRR SSD4P6PRR SSD4P7PRR SSD4P9PRR SSD4P11PRR SSD4P14PRR SSD4P16PRR SSD4P18PRR SSD4P22PRR SSD4P26PRR SSD4P30PRR SSD4P3AC SSD4P4AC SSD4P5AC SSD4P6AC SSD4P7AC SSD4P9AC SSD4P11AC SSD4P14AC SSD4P16AC SSD4P18AC SSD4P22AC SSD4P26AC SSD4P30AC SSD4P3ACRR SSD4P4ACRR SSD4P5ACRR SSD4P6ACRR...
- Página 29 PARTS LIST FOR SSD4P SERIES STALL SCREWDRIVERS SINGLE REDUCTION SERIAL “A” *Order Quantity As Required FURNISH CATALOG, SERIAL, AND MODEL NUMBER WHEN ORDERING PARTS Fig. Part Assembly Requirements Description Fig. Torque / Specification Threadlocker 21534B Retaining Ring 15-20 ft-lb Loctite 243 74501 Washer 41204 Spring 15-20 ft-lb...
- Página 30 PARTS LIST FOR SSD4P SERIES STALL SCREWDRIVERS SINGLE REDUCTION, RAPID REVERSING SERIAL “A” *Order Quantity As Required FURNISH CATALOG, SERIAL, AND MODEL NUMBER WHEN ORDERING PARTS Assembly Requirements Fig. Part Description Fig. Torque / Specification Threadlocker 15-20 ft-lb Loctite 243 21534B Retaining Ring 15-20 ft-lb Loctite 243...
- Página 31 PARTS LIST FOR SSD4P SERIES STALL SCREWDRIVERS DOUBLE REDUCTION SERIAL “A” *Order Quantity As Required FURNISH CATALOG, SERIAL, AND MODEL NUMBER WHEN ORDERING PARTS 37 38 10 11 35 36 28 29 26 27 Fig. Part Assembly Requirements Description Fig. Torque / Specification Threadlocker 74390 Gear Case...
- Página 32 PARTS LIST FOR SSD4P SERIES STALL SCREWDRIVERS DOUBLE REDUCTION, RAPID REVERSING SERIAL “A” 28 29 26 27 *Order Quantity As Required FURNISH CATALOG, SERIAL, AND MODEL NUMBER WHEN ORDERING PARTS 34 35 10 11 Assembly Requirements Fig. Torque / Specification Threadlocker 15-20 ft-lb Loctite 243...
- Página 33 PARTS LIST FOR SSD4P SERIES POSITIVE CLUTCH SCREWDRIVERS SINGLE REDUCTION SERIAL “A” 20 21 *Order Quantity As Required FURNISH CATALOG, SERIAL, AND MODEL NUMBER WHEN ORDERING PARTS Assembly Requirements Fig. Torque / Specification Threadlocker Fig. Part 15-20 ft-lb Loctite 243 Description 15-20 ft-lb Loctite 243...
- Página 34 PARTS LIST FOR SSD4P SERIES POSITIVE CLUTCH SCREWDRIVERS SINGLE REDUCTION, RAPID REVERSING SERIAL “A” 20 21 *Order Quantity As Required FURNISH CATALOG, SERIAL, AND MODEL NUMBER WHEN ORDERING PARTS Fig. Part Assembly Requirements Description Fig. Torque / Specification Threadlocker 74333-5 Rotor (5 tooth) (1400 RPM Only) 15-20 ft-lb Loctite 243 74333-6 Rotor (6 tooth) (1600 RPM Only)
- Página 35 PARTS LIST FOR SSD4P SERIES POSITIVE CLUTCH SCREWDRIVERS DOUBLE REDUCTION SERIAL “A” Assembly Requirements Fig. Torque / Specification Threadlocker 15-20 ft-lb Loctite 243 15-20 ft-lb Loctite 243 15-20 ft-lb Loctite 243 6-8 in-lbs None 20-25 ft-lb Loctite 243 36 37 1 1 1 1 Fig.
- Página 36 PARTS LIST FOR SSD4P SERIES POSITIVE CLUTCH SCREWDRIVERS DOUBLE REDUCTION, RAPID REVERSING SERIAL “A” Assembly Requirements Fig. Torque / Specification Threadlocker 15-20 ft-lb Loctite 243 15-20 ft-lb Loctite 243 15-20 ft-lb Loctite 243 4-6 ft-lbs Loctite 243 7-9 in-lbs Loctite 243 20-25 ft-lb Loctite 243 *Order Quantity As Required...
- Página 37 PARTS LIST FOR SSD4P SERIES ADJUSTABLE CLUTCH SCREWDRIVERS SINGLE REDUCTION SERIAL “A” Assembly Requirements Fig. Torque / Specification Threadlocker 15-20 ft-lb Loctite 243 15-20 ft-lb Loctite 243 6-8 in-lbs None 20-25 ft-lb Loctite 243 39 40 13 15 12 13 8 8 9 9 32 33 30 31...
- Página 38 PARTS LIST FOR SSD4P SERIES ADJUSTABLE CLUTCH SCREWDRIVERS SINGLE REDUCTION, RAPID REVERSING SERIAL “A” Assembly Requirements Fig. Torque / Specification Threadlocker 15-20 ft-lb Loctite 243 15-20 ft-lb Loctite 243 4-6 ft-lbs Loctite 243 7-9 in-lbs Loctite 243 38 39 12 13 13 15 20-25 ft-lb Loctite 243...
- Página 39 PARTS LIST FOR SSD4P SERIES ADJUSTABLE CLUTCH SCREWDRIVERS DOUBLE REDUCTION SERIAL “A” *Order Quantity As Required FURNISH CATALOG, SERIAL, AND MODEL NUMBER 49 50 WHEN ORDERING PARTS 42 43 13 14 8 8 9 9 10 7 7 7 7 Assembly Requirements Fig.
- Página 40 PARTS LIST FOR SSD4P SERIES ADJUSTABLE CLUTCH SCREWDRIVERS DOUBLE REDUCTION, RAPID REVERSING SERIAL “A” Assembly Requirements Fig. Torque / Specification Threadlocker 15-20 ft-lb Loctite 243 15-20 ft-lb Loctite 243 15-20 ft-lb Loctite 243 4-6 ft-lbs Loctite 243 7-9 in-lbs Loctite 243 20-25 ft-lb Loctite 243 42 43...
- Página 41 PARTS LIST FOR SSD4P22TCRR TORQUE CONTROL SCREWDRIVER, SINGLE REDUCTION, RAPID REVERSING SERIAL “A” 10 11 11 12 45 46 44 45 2 2 3 3 22 23 18 19 Assembly Requirements Fig. Torque / Specification Threadlocker 15-20 ft-lb Loctite 243 15-20 ft-lb Loctite 243 *Order Quantity As Required...
- Página 42 PARTS LIST FOR SSD4P SERIES TORQUE CONTROL SCREWDRIVERS, DOUBLE REDUCTION, RAPID REVERSING SERIAL “A” 10 11 11 12 38 39 32 33 53 54 51 52 2 2 3 3 48 49 22 23 20 21 Assembly Requirements Fig. Torque / Specification Threadlocker 15-20 ft-lb Loctite 243...
-
Página 43: Eu Declaration Of Conformity
Model No: SSD4XXXS, SSD4XXXP, SSD4XXXAC Modell-Nr.: SSD4XXXS, SSD4XXXP, SSD4XXXAC Modelo: SSD4XXXS, SSD4XXXP, Trademark: Sioux Warenzeichen: Sioux SSD4XXXAC Serial Number: MDPA Seriennummer: MDPA Marca: Sioux The object of the declaration described above is in Der Gegenstand der oben genannten Erklärung erfüllt Número de serie:... -
Página 44: Dichiarazione Di Conformità Eu
Sioux SSD4XXXAC Serienummer: MDPA Numero di serie: MDPA Marque déposée: Sioux Het onderwerp van de bovenstaande verklaring voldoet L’oggetto della dichiarazione sopra indicata è conforme Numéro de série : MDPA aan de relevante harmonisatiewetgeving van de alle norme comunitarie armonizzate in materia: L’objet de la déclaration décrit ci-dessus est en... - Página 45 Kenosha, WI 53141-1410, U.S.A. Föremål för försäkran: Produkt: Skruvdragare Modellnr: SSD4XXXS, SSD4XXXP, SSD4XXXAC Varumärke: Sioux Serienummer: MDPA Föremål för försäkran som beskrivs ovan överensstämmer med relevant unionslagstiftning om harmonisering; Machinerichtlijn: 2006/42/EC Hänvisningar till de relevanta harmoniserade standarder som använts eller hänvisningar till de specifikationer enligt vilka överensstämmelsen...
- Página 46 WARNING Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. WARNUNG Der durch Elektrosanden, -sägen, -schleifen und -bohren sowie durch andere Bauarbeiten anfallende Staub enthält Chemikalien, die nachweislich Krebs sowie Geburts- bzw.
- Página 47 This pdf incorporates the following model numbers: SSD4P3S, SSD4P4S, SSD4P5S, SSD4P6S, SSD4P7S, SSD4P9S, SSD4P11S, SSD4P14S, SSD4P16S, SSD4P18S, SSD4P22S, SSD4P26S, SSD4P30S, SSD4P3P, SSD4P4P, SSD4P5P, SSD4P6P, SSD4P7P, SSD4P9P, SSD4P11P, SSD4P14P, SSD4P16P, SSD4P18P, SSD4P22P, SSD4P26P, SSD4P30P, SSD4P3AC, SSD4P4AC, SSD4P5AC, SSD4P6AC, SSD4P7AC, SSD4P9AC, SSD4P11AC, SSD4P16AC, SSD4P18AC, SSD4P22AC, SSD4P26AC, SSD4P30AC, SSD4P3SRR, SSD4P4SRR, SSD4P5SRR, SSD4P6SRR, SSD4P7SRR, SSD4P9SRR, SSD4P11SRR, SSD4P14SRR, SSD4P16SRR, SSD4P18SRR, SSD4P22SRR, SSD4P26SRR, SSD4P30SRR, SSD4P3PRR, SSD4P4PRR, SSD4P5PRR, SSD4P6PRR, SSD4P7PRR, SSD4P9PRR, SSD4P11PRR, SSD4P14PRR,...