IBP TENS WL-2103A Manual De Instrucciones página 36

36
IBP_WellTENS_01_GB_DR.indd 36
Insert the plug into the output jack as far as it will go.
7. Switch on Channel 1 and Channel 2 of the Well TENS by rotating the left
and right on/off knobs clockwise until you hear a click. The LED displays
will light up.
NB: Make sure that the current settings are as specified by your
doctor or therapist.
8. Set the intensity for Channel 1 and Channel 2 by turning the left and right
on/off knobs slowly clockwise until the stimulation reaches a pleasant level
of intensity.
9. Reduce the pulse intensity or switch off the Well TENS
if you begin to find the stimulation unpleasant.
10. Ending the treatment:
When the treatment duration as set has expired, the stimulation will cease
automatically and the LED displays on the Well TENS will go blank.
Switch off Channel 1 and Channel 2 of the Well TENS by turning the left
and right on/off knobs anticlockwise until you hear a click. The LED
displays will go blank.
11. Remove the self-adhesive electrodes from the skin by pushing a fingertip
under each electrode and lifting it off in the direction of the hair growth.
01.03.2006 11:08:34