Trust Vintori Guía De Instalación Rápida página 6

Bluetooth Audio Speaker - USER'S MANUAL
Configuration on a Mac system
- Click on the Bluetooth icon in the taskbar.
- Make sure Bluetooth is on.
- Go to 'set up Bluetooth device...'.
- Select 'Trust BT Audio' in the list of Bluetooth devices (make sure the device is in pairing mode).
- Click on 'Continue'.
- If the pairing attempt was unsuccessful. Go to 'Passcode options'.
- Select 'Use a specific passcode'.
- The passcode to use is '0000'.
- Click on 'ok'.
- Click on 'Continue'.
- Your device is now ready to use.
Advanced Controls
Standby
By pressing and holding the volume control for 4 seconds the speaker goes into standby mode (LED
flashing red 1x every second).
To power the speaker back on, press the volume control for 1 second.
Volume/ Treble/ Bass control
Press the volume control when playing music to switch between volume, treble, and bass.
Speaker memory
The speaker has an build in memory. So that every time you power on the speaker and your music
device they will automatically connect.
To clear the memory of the speaker press and hold the play/pause button for 5 seconds.
Change audio input
The speaker has 2 different audio inputs. Bluetooth and 3.5mm audio.
By pressing the input selection button 'A' you can switch between these inputs.
The LED light indicates the selected input source: - Blue Led: Bluetooth
- Red LED: 3.5mm audio input
4