Phottix Odin II TTL Guía Rápida página 2

Flash Groups, Channels and ID setting
The Phottix Odin II System has:
• 5 flash groups: A, B, C, D and E;
• 32 transmission channels; (Default at Channel 32)
• Digital ID Setting with 0000-9999 settings available.
Receivers can be assigned to a group, a channel and an ID at the same time.
The TCU can adjust the EV, Power Levels and Zoom for each group (A, B, C,
D and E) of receivers which are set to the same channel, and have the same
Digital ID setting. (Unless the group is set to OFF on the TCU).
Adjusting Channel, Group and Digital ID on the TCU
The channel, group and ID number of the TCU can be set in Odin II Menu.
Please see Menu functions below.
Adjusting Channel, Group and Digital ID on the Receiver
1. To set Channels on the Receiver
2. Press 2.button, when the channel indicator on the LCD screen flashes.
3. Press or button to set the channel.
4. Press button to exit.
To set Group setting on the Receiver
1. Press button, when the group indicator on the LCD screen flashes.
2. Press selection button
3. Press button to exit.
To set the Digital ID number on the Receiver
1. Press button.
2. Press selection button
3. Press the ID (insert graphic) button to advance to the next digit.
4. Repeat until a four digit code is set.
5. Press to exit setting mode
Please note: When the Odin II is set to channels (1,2,3,4) it is compatible with
Odin I receivers and Mitros+ flashes. When set to these channels the Odin II
TCU will only control group A, B and C (like the Odin I TCU). Group D and E will
not be displayed on the TCU and the Digital ID Function is not available when
using Channels 1-4.
Odin II Display
TCU
The TCU has two operating modes: Mixed TTL/M mode and
Ratio mode.
2
or to set group.
or to adjust the ID value.
QUICK GUIDE
En
The Mixed TTL/M Mode (channels 5-32):
GlobalFlash
AF Asist Light:
Exposure
: Enabled
Compensation
(Adjust the Blank: Disabled
compensation
of all group set
to TTL mode)
Battery Level
Display
Groups
Flash Mode : TTL, M, OFF
(When set to OFF, the group
will dispear from the screen)
The Mixed TTL/M Mode(channels 1-4)
Ratio mode
Flash Ratio
Receiver
Flash and Receiver Communication
： In Communication
Channel: 01-32
Blank: Out of communication
Group: A, B,C,D,E Battery Level Display
High Speed Sync
: Enabled
Blank: Disabled
Channel: 05~32
Flash Output
Flash Exposure
Compensation
:
Channel: 01~04
: ZOOM Level
Adjustment in active
(20-200mm)
: Modeling Light
Adjustment in active (0-9)
Blank: Zoom Level/
Modeling Light
Adjustment Inactivated
Digital ID:
0000~9999
Digital ID selected