Introduction; Battery Pack Versions; 64060625/30538111 Differences - Mettler Toledo 30538111 Manual De Instalación

1

Introduction

Thank you for purchasing the 64060625/30538111 – designed as intrinsically safe to power
METTLER TOLEDO intrinsically safe terminals within hazardous, classified areas.
This NiMH battery pack was designed with safety as the very highest priority. To provide confidence
of this safety, the battery pack includes agency approvals from Factory Mutual and IECEx, and certifications to the ATEX directive.
The 64060625/30538111s provide 10 volts to operate an intrinsically safe terminal. The battery is
designed to be used within the hazardous area but it must be recharged only in a safe area. Refer
to the approval markings on the battery's data label to determine suitability for the application.
1.1.

Battery Pack Versions

This manual describes the installation procedure and technical details for the METTLER TOLEDO
64060625/30538111 intrinsically safe battery packs.
The 64060625/30538111 intrinsically safe battery packs provides the following features:
•
•
•
•
For information regarding METTLER TOLEDO Technical Training contact:
1.2.

64060625/30538111 Differences

Differences between the two battery packs are:
•
•
•
64062816 | 09 | 05/2021
Stainless steel enclosure (containing less than 7.5% magnesium) with integral mounting tabs
Environmentally friendly NiMH (nickel metal hydride) battery technology
Quick disconnect coupling
Global safety approvals
Mettler-Toledo, LLC
1900 Polaris Parkway
Columbus, Ohio 43240
Phone (US and Canada): (614) 438-4511 Phone (International): (614) 438-4888
www.mt.com
64060625 and associated charger are used only with IND560x and IND226x
30538111 and associated charger are used only with IND256x
Entity parameters differ, as noted in Chapter 2, section 2.3.
METTLER TOLEDO NiMH Battery Pack Installation/Technical Manual 1-1