Urbanista London Manual De Instrucciones página 3

L O N D O N M A N U A L
1. PAIRING MODE
FI RST TI M E PAI RI N G
To connect the earphones to a Bluetooth device for the first
time - open the charging case whilst the earbuds remain inside
the case. The earphones will automatically enter pairing mode.
Open Bluetooth settings on your device and select "Urbanista
London". You can now enjoy your music and make phone calls
using your Urbanista London.
If pairing is not established within 5 minutes, pairing mode is
cancelled and the procedure must start over.
2 . EARBUDS
PLAY - Tap the logo (1) on the Left (L) earbud twice.
PAUSE - Tap the logo (1) on the Left (L) earbud twice.
VOLUME (+) - Tap the logo (1) on the Right (R) earbud.
VOLUME (–) - Tap the logo (1) on the Left (L) earbud.
ANSWER INCOMING CALL - Touch the logo (1) on
the Left (L) or the Right (R) earbud twice.
END A CALL - Touch the logo (1) on the Left (L) or
the Right (R) earbud twice.
REJECT A CALL- Touch and hold either the logo (1)
on the Left (L) or the Right (R) earbud.
SIRI - Touch the logo (1) on the Right (R) earbud twice.
ACTIVE NOISE CANCELLING ON/OFF - Touch and
hold the logo (1) on the Right (R) earbud for 2 seconds.
AMBIENT VOICE MODE ON/OFF - Touch and hold
the logo (1) on the Left (L) earbud for 2 seconds.
4
( E N G )
EAR DETECTION - Built in sensors will make the music stop
automatically if one earbud is removed from your ear. The auto
play function will kick in once you put the earphone back in
your ear and the music will start to play again. Once removed
from your ear, the touch button function will be disabled.
Phone calls will not be terminated although if one earbud is
removed from the ear.
BATTERY STATUS INDICATOR - After closing the lid of the
charging case, the battery status indicator lights (3) will display
the remaining battery level.
LOW-BATTERY WARNING - When your battery power is
running low, there will be a voice prompt "low battery" and
30 minutes playtime left before the earphones turn off auto-
matically.
3. CHARG IN G
The earbuds will charge automatically when placed in the
case. The battery indicator lights (3) will flash once when the
earbuds are placed in the case. The outer indicator lights will
flash every 10 seconds until the earbuds are fully charged.
TO CHARGE THE CASE - Plug in the type-C cable to an ener-
gy source or place the case on any Qi-certified charging pad.
The battery indicator lights will flash subsequently until fully
charged. Once fully charged the battery indicator lights will
be lit continuously.
If the battery indicator lights do not work as described, dis-
connect the charger from the charging case and reconnect it.
SILICONE BUDS - The complimentary silicone ear buds come
in different sizes. Choose the size that suits your ears best so
that they fit comfortably in your ears and provide effective
noise cancelling of ambient sounds.
5