Installation; Setting Up The Transmitter Unit - Philips LM1000 Instrucciones De Manejo

SBC_LM1000.qxd 18-02-2004 15:34 Pagina 8
ENGLISH
8
LM1 LM1
100 TVL 100 TVL
INK TRA INK TRA
NSM ITTE NSM ITTE
R R
TV AUDIO
INPUT INPUT
TV AUDIO
INPUT INPUT
TV AUDIO
INPUT INPUT
AV SOURCE INPUT AV SOURCE INPUT
R–AUDIO–L R–AUDIO–L VIDEO VIDEO DC 9V DC 9V
CHANNEL CHANNEL
IR IR
1 2 3 4 1 2 3 4 ON/OFF ON/OFF
TV AUDIO
INPUT INPUT
AV SOURCE INPUT AV SOURCE INPUT
R–AUDIO–L VIDEO DC 9V
CHANNEL R–AUDIO–L VIDEO DC 9V
IR IR CHANNEL
1 2 3 4 1 2 3 4 ON/OFF ON/OFF
OURCE INPUT OURCE INPUT
UDIO–L UDIO–L VIDEO VIDEO DC 9V DC 9V
ON/OFF ON/OFF

3. Installation

Setting up the transmitter unit

1 Position the transmitter unit near of the PC.
Never place other devices on top of the transmitter unit.
2 Check the Instructions For Use of the PC sound card for the exact
location of the audio output.
3 Connect the 3.5 mm jack plug (black) of the audio/video cable (9)
supplied to the audio output of the PC.
Please note that the rear of your PC may differ from the example in the
illustration.
In case you have PC speakers connected to the PC
3a Remove the PC speaker plug from the audio output of the PC and
connect it to the Audio splitter (10) supplied.
3b Connect the 3.5 mm jack plug (black) of the audio/video cable (9)
supplied to the Audio splitter (10).
3c Connect the Audio splitter (10) to the audio output of the PC.
4 Connect the video plug (yellow) of the audio/video cable (9) supplied to
the TV-Out output of the PC.
Read the Instructions For Use of the PC or video card on how to activate
the TV-Out function. In case you are not able to activate the TV-out of your
video card, contact the helpdesk of the PC or videocard manufacturer
5 Connect the audio/video plugs at the other end of the audio/ video cable
(9) supplied to the AV SOURCE INPUT connectors (5) on the
transmitter unit.
Make sure to insert the yellow plug into the yellow video input and the
white and red audio plugs into the left (L) and right (R) audio inputs.
6 Connect the AC power adapter (8) to a mains socket and to the DC 9V
—<± supply socket (4) of the transmitter unit.