Troubleshooting - sunjoe SJ-BZ18W Manual Del Usuario

Troubleshooting

m
WARNING!
m
WARNING!
replaced with like components. Servicing shall be done by factory authorized service personnel to
minimize the risk of possible ignition due to incorrect parts or improper service.
Problem
Both the black
light and
electric grid are
not working
The black light
works, but not
the electric grid
The electric
grid works, but
not the black
light
Intermittent
or continuous
sparking from
the grid
The black light
no longer
attracts insects
Always unplug the bug zapper before servicing to avoid electric shock.
Do not try to adjust or repair the bug zapper yourself. Component parts shall be
Possible Cause
• No electrical power
• The grid is shorted
• The transformer is
defective
• The black light is not
properly seated
• Black light is burnt out
• The electric grid is
bent out of shape,
causing a short
• Grid is clogged with
foreign objects
• Low UV output due to
aging of the black light
• Bug zapper is
positioned incorrectly
or operated at
suboptimal times
• Make sure the device is properly
plugged into a working outlet
• Check the circuit breaker or the surge
protection on the extension cord
• Unplug and examine the grid. Clean
debris with the included brush
• Request a replacement from the
manufacturer
• Make sure the black light is properly
seated into the socket
• Unplug the device and replace the
black light. Refer to the Replacing the
UV Black Light section of this manual
for reference.
• Request a replacement from the
manufacturer
• Unplug and examine the grid. Clean
debris with the included brush
• Unplug the device and replace the
black light. Refer to the Replacing the
UV Black Light section of this manual
for reference.
• Move the device to a different
location, operate it at night.
7
Remedy