Tool Specific Safety Warnings; Safety Instructions For All Operations; Safety Instructions When Using Drill Bits; Safety Instructions When Using Hammer Mode - JCB -18BLRH Instrucciones De Funcionamiento

TOOL SPECIFIC SAFETY WARNINGS

1. Safety instructions for all operations

Wear ear protectors when impact
m
drilling. Exposure to noise can cause
hearing loss.
Use the auxiliary handle(s). Loss of
m
control can cause personal injury.
Hold the power tool by insulated
m
gripping surfaces, when performing
an operation where the cutting
accessory or fasteners may contact
hidden wiring. Cutting accessory
contacting a "live" wire may make exposed
metal parts of the power tool "live" and
could give the operator an electric shock.
2. Safety instructions when using drill
bits
Never operate at higher speed than
m
the maximum speed rating of the
drill bit. At higher speeds, the bit is likely
to bend if allowed to rotate freely without
contacting the workpiece, resulting in
personal injury.
Use a detector to locate lines in walls
m
with concealed electric, water or gas
lines. Avoid touching live components
or conductors. Inadvertant contact with
hidden items may cause serious injury or
damage to the tool.
Always start drilling at low speed
m
and with the bit tip in contact with
the workpiece. At higher speeds, the bit
is likely to bend if allowed to rotate freely
without contacting the workpiece, resulting
in personal injury.
JCB-18BLRH
Instruction & User Manual
Apply pressure only in direct line with
m
the bit and do not apply excessive
pressure. Bits can bend causing breakage
or loss of control, resulting in personal
injury.
3. Safety instructions when using
hammer mode
Keep exposure to vibrations as short
m
as possible. When carrying out work,
always hold the hammer with both
hands and ensure that you have a
stable standing position.Vibrations can
injure the nerves in hands & arms.
7