Technical Data; Filling The Magazine - KMR 3407 Manual Del Usuario

4 I English
1

TECHNICAL DATA

Type
Dimensions mm
Weight kg
(without fasteners)
Single sequential actuation with safety yoke
Recommended operating pressure
range
Maximun permissible operating
pressure
Air consumption per driving
operation
Magazine capacity.
No. of fasteners
Penetration depth setting
Fasteners: Staples A
Staple length mm
Wire thickness mm
Staple width mm
Recommended lubricant
1 litre special oil. Code No.
250 cm3 grasa especial. Code No.
2 NOISE/VIBRATION INFORMAZION
Noise characteristic values *
A-weighted single-event emission
sound pressure level at work
station L pA, 1s
A-weighted sound power level L
WA, 1s, d
Vibration characteristic values **
Weighted r.m.s.-acceleration (a),
a h, w, 3s
The noise level when working can exceed 85
dB (A). Wear ear protection!
* Measured values determined according to
EN 12549:1999.
** Measured values determined according to
ISO 8662-11:1999.
SUPPLIED WITH
3
1 Stapler
1 Tool use and safety instructions
1 Technical data sheet
KMR
4
3407
Only those fasteners specified under technical data
(see 1) may be used.
150/215
When filling the magazine, hold the tool so that the
muzzle is not pointing towards own body or towards
0,9 kg
any other person.
Do not load the tool with fasteners with the safety
yoke or trigger depressed.
4 - 7 bar/
Turn the fastener with the magazine upside down.
0,4 - 0,7 MPa
Press the locking lever (l) and pull the magazine
(m) back. Introduce the staples and slide the rail
7 bar / 0,7 MPa
forward rail until it locks.
0,28 l at 6 bar /
0,6 MPa
5
130
no
Balancer for 10 - 20 N (1.0 - 2.0 kp),
cable travel 1.6 m (5.2 ft).
6-16
0,5 x 1,27
12,5
9 4420
68 3868
3407
82 dB(A)
87 dB(A)
< 2,5 m/s2

FILLING THE MAGAZINE

ACCESSORIES
3407
Code No.
40 3393