PVG SRE 30x Instrucciones De Uso página 74

p50_61_uk_SRE30x.qxd:p32_41_uk_SRE70xTC.qxd 18-11-13 15:42 Page 52
GENERAL DIRECTIONS FOR USE
Below you will find the main steps to be taken for
using your heater. For more details, please refer to
Section A.
Remove all packaging materials (refer to Section A).
2
Fill the removable tank (refer to Section B).
3
Insert the plug into the wall-socket.
4
Ignite the heater using the
5
If required, change the temperature using the adjustment
buttons (refer to Section F).
6
Switch off the heater by pressing the
H).
• As a fire precaution, the tank must be filled either
when the heater has been switched off or in
another room than the room where the heater is
installed.
• Always ensure that the tank is closed properly
after filling it at a safe distance from all sources of
heat and open flames (see chapter B).
• The first time the heater is ignited it will smell like
"new" for a short time.
• Store all fuel containers with their original caps
and seals in a cool and dark place.
• Fuel ages. Use new fuel at the start of every
heating season.
• The use of Zibro Premium Quality Fuels / PTX as a
heating fuel assures you that you have a good
quality fuel.
• Before changing brands and/or types of fuel make
sure that the mobile heater first completely
empties all of the remaining fuel inside the
heater.
• Prevent all contact with the grill, since it can
become very hot.
key (refer to Section D).
key. (refer to Section
52