entered into standby mode automatically.
3.2.2 Press the recording button once to record video. The blue indicator light will flash 3
times and then turn off.
3.2.3 Press the recording button once again to stop video recording. The blue indicator light
will flash twice and then solid on, indicating that the camera is back to standby mode
already.
[Note]: It is 10min for each video clip; the video format is AVI, the video resolution is 4032x3024; the
camera will stop video recording automatically when the memory card is full.
3.3 Camera/Still Photography
3.3.1 Power on the camera by pressing and holding down the Power Button for 2 seconds,
the blue light indicator will flash once and then solid on, indicating that this camera has
entered into standby mode automatically.
3.3.2 Press the Power Button once to take a photo. The blue indicator light will flash 3 times
and then turn off. This camera will keep photo taking automatically.
3.3.3 Hold down the power button for 2 seconds, the camera will back to standby mode, and
the blue indicator light will be solid on.
3.4 Video/Image File Upload
3.4.1 Power off the camera.
3.4.2 Connect the camera to a proper PC computer with the USB cable.
3.4.3 Removable disk drive folder appears..
3.4.4 All the video and photo files can be accessed in the DCIM folder.
3.5 Set Date/Time Stamp
3.5.1 Connect the camera to a proper PC computer with the USB cable when the camera is
powered off.
3.5.2 Removable disk drive folder appears.
3.5.3 Click on the drive in the root directory and inside the root directory, create a TXT
document file named "time.txt".
3 / 25