Digital Audio Setup - Mad Catz WARHEAD 7.1 Manual Del Usuario

Charge the battery and insert it into the Headset. See page 7 for more information.
1
Remove protective caps from the Optical Cable.
2
A- Plug one end of the Optical Cable into the optical port on the rear of the Xbox 360
3
Console. Plug the other end of the Optical Cable into the wireless Base Station.
OR
B- If using the Xbox 360 Console (Original) with HDMI, connect the Optical Cable to the
Digital Audio Adapter, and then connect the Digital Audio Adapter to the AV port on the
rear of the Xbox 360.
If using the Xbox 360 Console (Original) with Component/VGA/Composite AV cable,
connect the Optical Cable to the optical port on the Component/VGA/Composite AV cable.
4 Connect Power Adapter to Base Station. Plug Power Adapter into wall outlet.
Power ON the Xbox 360 Console and Headset.
5
In the Xbox dashboard, select System Settings > Console Settings > Audio > Digital Output
6
and select "Dolby Digital 5.1." Watch to ensure that the "Dolby Digital" light on the Base
Station illuminates as a game or movie starts.
To confirm Xbox LIVE settings, press the "Xbox Guide Button" when a game is loaded, and go
7
to Personal Settings > Voice. Ensure that "Headset Only" is selected.
Press the connect button on the Xbox 360. Press and hold the connect button on the headset
8
for 3 seconds.
Match the Base Station quadrant to the controller by pressing the Connect Button. See page
9
18 for more information.
Press the Input button on the Headset to select the digital input. The "Digital" LED on the
10
Base Station will illuminate when the digital input is selected.
®
TRITTONUSA

dIgItal audIo setuP

[12]
S
®