Characteristics; Safety - FuelTech Peak and Hold PRO Manual Del Usuario

Peak and Hold PRO Injector Driver

3. Characteristics

Dimension:
•
•
•
•
Electrical characteristcs
•
EN
•
•
•
•
•

3.1 Safety

Whenever the Peak and Hold PRO Injector Driver is under operation the case
might warm up, avoid touching when it's surface is hot.
4
Width: 3.54 in (90 mm)
Length: 1.77 in (45mm)
Height: 4.5 in. (115mm)
Material: Anodized Aluminum and Plastic
8 signal inputs
8 injectors outputs
Peak and hold current individually configurable via FTManager
Power supply: from 9 to 30V
FuelTech CAN protocol
Automotive connector, 26 way.
WARNING
We recommend the Driver to be installed at a ventilated
place.