Assembly Instructions - Kobalt 59725 Manual Del Usuario

ASSEMBLY INSTRUCTIONS

1. Mount the two swivel casters with brake
(F) to the bottom of the bottom tray (E)
using four M8 x 15 mm bolts (BB) and M8
nuts (CC) per caster. The swivel casters
with brake (F) should be installed on the
same end as the side handle (B). Repeat
this process for the other swivel casters
(G) on the opposite end of the bottom tray
(E).Tighten all bolts with a 13 mm wrench.
Return the unit to its upright position.
Note: Do not over tighten the bolts.
Be sure to keep the tray on a soft surface,
such as carpeting or a piece of cardboard,
to protect them from scratches.
Hardware Used
BB
M8 x 15 mm Bolt
CC
M8 Nut
2. Mount the four posts (C) to the bottom
tray (E) using four M8 x 11 mm bolts (AA)
and M8 nuts (CC) per post (C). Finger
tighten only.
Note: Lock 2 swivel casters to prevent it from
rolling and swiveling.
Be sure to install the posts in the direction
indicated by the arrow on the label, or the
next step will not be able to install.
Do not fully tighten bolts yet to allow for some
movement during cabinet installation.
Hardware Used
AA
M8 x 11 mm Bolt
CC
M8 Nut
1
G
CC
x 16
x 16
2
x 16
x 16
6
E
BB
AA
C
CC
C
E
F
C