Check The Application Conditions; Sensing Range - SICK W4F Manual Del Usuario

7.2

Check the application conditions:

8025303.1BBX / 2021-04-27 | SICK
Subject to change without notice
Figure 2: Alignment aid BluePilot

Sensing range

Adjust the distance between the sensor and the reflector according to the correspond‐
ing diagram [figure 3] (x = sensing range, y = operating reserve).
After alignment, place a non-transparent object into the path of the beam. Check the
function as described in figure
figure X, check the application conditions.
Standard reflectors:
Operating reserve
40
35
5
6
30
7
25
4
20
3
15
2
10
5
1
1
0 1 2 3
(3.28) (6.56) (9.84)
Figure 3: Characteristic curve for standard
reflectors
Reflector PL22
1
Reflector PL20A
2
Reflector PL30A
3
Reflector PL40A
4
Reflector PL80A
5
Reflector C110A
6
Reflector P250
7
Fine triple reflectors:
X. If the switching output fails to behave as described in
1
0.02
2
0.015
3
0.015
4
0.015
5
0.015
6
0.015
7
0.015
0
(3.28)
A
A = Sensing range min. in m
B = Sensing range max. in m
C = Maximum distance range from reflector to sensor (operating reserve 1)
D = Recommended distance range from reflector to sensor (operating reserve 3.75)
Recommended sensing range for the best performance
Figure 4: Bar graph for standard reflectors
4 5 6
(13.12) (16.40) (19.69)
Distance in m (feet)
COMMISSIONING
2.0 3.0
1.9 2.5
3.1 4.5
4.0 5.0
4.5 5.5
4.5 5.5
3.9 4.5
1 2 3 4 5 6
(6.56) (9.84) (13.12) (16.40) (19.69)
Distance in m (feet)
D
C
B
7
9