Cleaning And Maintenance - Concept VO4010 Manual Del Usuario

EN
PAIRING THE APP
• Enable the Bluetooth function in your mobile phone.
• Open the Feelfit app and follow the instructions on the screen.
• Select the basic data and register.
• Click „+" on the display of the phone to add a new device and step on the scale. If the pairing is successful, an icon
of a scale appears on the display of the phone, click on it.
MEASUREMENT
• Place the scale on a hard, even floor.
• Stand with your bare feet in the middle of the scale, as shown in the picture below.
• Wait for your weight to display. You will see a moving zero, which signals the measurement of body parameters.
After the measurement is finished, your weight is displayed again.
• All measured data are displayed in the app.
TIPS FOR OPTIMAL MEASUREMENT
• To ensure the most accurate and consistent measurement, we recommend using the scale at the same time every
day.
• Place the scale on a firm, dry floor. Weigh barefoot and position your feet so that your weight is evenly distributed
on the scale. Wash and dry your feet.
• Do not weigh after exercising, showering, bathing or sauna, drinking alcohol, if you have fever or if you have just
eaten.
36
DISPLAY
• The picture below shows the individual displays of the appliance.
Normal operation, the
Replace the batteries

CLEANING AND MAINTENANCE

To clean the surface of the appliance, use only a damp cloth, no detergents or hard objects, as they can damage the
surface of the appliance!
Never clean the appliance under running water, do not rinse it or immerse it in water!
Store the appliance in a dry place!
VO4010 | VO4011 VO4010 | VO4011
Replace the batteries
scale is connected
Overload
EN
Not connected to the
app
Calibration
37