Scanned Picture Naming Convention; Safely Disconnect The Scanner From Computer; For Windows; Scan Pc Software For Kodak Personal Photo Scanners - Kodak P811 Guia Del Usuario

Scanned Picture Naming Convention

After your first scan, a folder titled
The scanned pictures are saved in the
followed by a 4- digit sequential number in the order the pictures are stored. For example,
If the file name reaches
store subsequent new files, and so on.
There can be up to 9 folders (
indicator light blinks.
You can now view or edit the files on the memory card using your own photo editing software.

Safely Disconnect the Scanner from Computer

For WINDOWS

1. On the WINDOWS System Tray, click the hardware removal icon as indicated below.
Hardware Removal Icon
2. Click the 'Safely remove USB mass Storage device' message with the corresponding Drive.
3. When the 'Safe to Remove Hardware' message appears, you can safely remove the scanner's USB cable.
For MAC
On the desktop, right-click on the
S c a n P C S o f t w a r e f o r K O D A K P e r s o n a l P h o t o S c a n n e r s
With the Scan PC Software for KODAK Personal Photo Scanners (Scan PC Software), you can easily scan photos and save the
scanned pictures directly to the connected PC.
System Requirements
 Operating system: WINDOWS XP, WINDOWS VISTA, WINDOWS 7
 Intel Pentium IV processor
 1.2GHZ or better processor speed
 512MB RAM
 10MB free hard disk space
 USB 2.0 compatible

Install Scan PC Software

1. Connect the scanner to your PC (see instructions beginning on page 14), using
the included SD Memory Card.
2. Open a Windows Explorer window.
3. Select
KODAKSCAN>KODAK>Software>KODAK_Scan_PC_Software_Setup_Vxxxx
4. Double-click the
5. In the Install window, select
then click
Install
6. In the Install Wizard window, click
7. Click to install in default location, or select desired location and then click
Next
.
Next
8. In the Ready to Install window, click
9. After the software is installed, click
 Once installed, the
 If you want to close the
16 Customer Support: http://www.pandigital.net/kodaksupport
All manuals and user guides at all-guides.com
PHOTO1
is added to the memory card file structure.
PHOTO1
EK_9999.jpg PHOTO1
in the
PHOTO1..9 EK_0001... EK_9999
,
volume, then select
KODAKSCN
ScanPC_KODAK_Scanner_Setup_Vxxxx.exe
Scan PC for KODAK Personal Photo Scanners
.
.
Next
.
Install
.
Finish
Scan PC Software
runs automatically upon PC startup, and the
Scan PC Software
temporarily, right-click on the icon and select Exit.
folder. Each scanned picture is given a file name with the prefix
folder, a new folder titled
) on a memory card. If exceeded, the Status/Card
Eject "KODAKSCN"
file.
, and
EK_0001.jpg EK_0002.jpg
,
PHOTO2
is automatically created to
.
.
icon stays on the system tray.
EK_
.