Tabla de contenido
Idiomas disponibles
Idiomas disponibles
5. Outing Function (Continued)
• Setting the Outing Function
1. Press and hold
for more than 2 seconds to display the upper limit
temperature setting screen.
,
and the upper limit temperature start flashing.
(The default value of the upper limit temperature is 38 °C.)
2. Press
/
fix the value. The lower limit temperature setting screen is displayed.
3. Press
/
fix the value. The outing function setting is completed. (The default value of
the lower limit temperature is 10 °C.)
* The unit returns to the normal mode if
3 minutes during the setting. In this case, all the settings in progress will be lost.
• Canceling the outing function
Press and hold
for more than 2 seconds while the outing function is set.
• Outing function indication
Outing function
indication
Off
The outing function is not set.
Flashing
The outing function is now being set, or under operation.
Lighting
Although the outing function is set, not under operation.
Note
A remote controller loses outing function operation information when it is cut for more than one hour
during the outing function operation by electricity. It reverts from the blackout, and an air conditioner
does not drive in outing function when operation is started. At this time, an air conditioner does not stop
at outing function.
to select the upper limit temperature and press
to select the lower limit temperature, and press
is pressed or there is no operation made for
EG-12
to
to
Status
2
3
Tabla de contenido
