Technibel K70D052Z Manual De Instrucciones página 11

Controlador remoto del temporizador
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 91
3. Setting the Present Time
1. Press and hold
for more than 2 seconds to enter in the
present day and time setting mode.
Once you enter in the setting mode,
"time" flash.
2. Set " " to today's day of the week.
1
Press
*
display) in the order of : Su → Mo → Tu → .... Press
to move it in the order of : Su → St → Fr → ....
*1
While in time setting mode, the temperature setting
buttons function as
3. Press
to change the present "hour" in the range of 0 to 23*
Set the present hour and press
The "hour" digits light up, and the "minute" digits start flashing.
*2
If the clock uses the 12 hours AM/PM setting, the hour is displayed in the
range of AM 0 to 11/PM 0 to 11.
4. Press
, to change the present "minute" in the range of 0 to 59.
Set the present minute and press
setting mode.
Note
• The unit returns to the normal mode if
during the setting. In this case, all the settings in progress will be lost.
• If the present time is invalid, "– – : – –" is displayed.
If the power failure for more than 1 hour occurs, check if the set data of day and time are valid.
, " "(day) and
to move " " (flashing on the
(changing day) button.
.
. The day and time are set and finishes the
is pressed or there is no operation made for 3 minutes
EG-5
3,4
1,3,4
2
.
2
EG
Tabla de contenido
loading

Tabla de contenido