Making A Scan - Braun NovoScan A6 Manual Del Usuario

All manuals and user guides at all-guides.com
5. Press the Power button. The Power
indicator blinks.
NOTE
indicators, see "Indicators" on page 7.
6. Wait until the Power indicator stops
blinking and then goes off. The Status/card
indicator will light up instead, indicating
that the scanner is ready.
NOTE
feeding slot when the Power indicator
is blinking. The photo will not be
scanned.

Making a scan

1. With the side to be scanned facing upward
and in correct orientation as indicated by the
orientation mark, place one edge of the
original on the scanner and adjust the guide
lever so that the original aligns against the
left side of the feeding slot.
Insert the original into the feeding slot.
Align left
2. The original will be fed into the slot and
scanned automatically. The Power and
Status/card indicators blink while scanning.
NOTE
page 13 for how to insert photos and
other types of originals.
Using the scanner
: For more information on the
: Do not insert a photo into the
WARNING
: Do not scan glossy
photos in humid environments
(humidity higher than 70% RH).
Otherwise the surface of the photo
will become sticky and cause the
scanner to jam.
: See "More information" on
9